Nanoindentation Induced Deformation Near Grain Boundaries of Corrosion Resistant Nickel Alloys
Name
Van Vliet_Nanoindentation induced.pdf
Size
263.15 KB
Format
Adobe PDF
Checksum (MD5)
07e57626f0b35d7ff4db0856c419e5d5
Author(s)
Yildiz, Bilge
Herbert, Francis William
Van Vliet, Krystyn J
Date Issued
March 2011
Journal
MRS Proceedings
Publisher
Cambridge University Press
Citation
Herbert, F. William, Bilge Yildiz, and Krystyn J. Van Vliet. “Nanoindentation Induced Deformation Near Grain Boundaries of Corrosion Resistant Nickel Alloys.” MRS Proceedings 1297 (January 10, 2011). © Materials Research Society 2011
Version
Final published version
Abstract
The damage accumulation behavior of different grain boundary structures in Inconel 690 (Ni-29wt%Cr-9wt%Fe) was investigated in the presence of large, localized plastic strains induced by nanoindentation. Spatially-resolved hardness was measured as a function of lateral distance from ‘random’ high-angle grain boundaries and twin boundaries. The confinement of induced defects between the indenter tip and grain boundaries did not lead to significant differences in measured hardness between high angle and twin boundaries. Critical “pop-in” loads indicating the onset of incipient plasticity were lower within 1μm of grain boundaries, but were statistically equivalent for random and twin boundaries. These results suggest a comparable extent of dislocation mobility and absorption at the different grain boundary types in Inconel 690 under ambient conditions.
MIT Department
Massachusetts Institute of Technology. Department of Materials Science and Engineering
Massachusetts Institute of Technology. Department of Nuclear Science and Engineering
Terms of Use
Article is made available in accordance with the publisher's policy and may be subject to US copyright law. Please refer to the publisher's site for terms of use.
Persistent DSpace Link
DOI of Published Version
https://doi.org/10.1557/opl.2011.463
