Design of Fouling-Resistant Coatings for Energy Systems: Theory and Proof of Principle at Realistic Conditions
Name
Carlson-mc7-phd-nse-2021-thesis.pdf
Description
Thesis PDF
Size
41.84 MB
Format
Adobe PDF
Checksum (MD5)
da834f5d2f79b190286e0e885a6c405b
Author(s)
Carlson, Max
Advisor(s)
Short, Michael
Simpson, Robert
Slocum, Alexander
Date Issued
June 2021
Publisher
Massachusetts Institute of Technology
Abstract
The buildup of corrosion deposits, known as fouling or CRUD in PWRs, seriously hinders large-scale energy production. From nuclear power plants to geothermal reservoirs, fouling increases system pressure drops, impedes heat transfer, and accelerates corrosion, leading to derating and early failure. Here we propose and demonstrate a design principle for foulant-agnostic thin film (sub-micrometer) coatings, based on minimizing van der Waals (vdW) forces between a material surface and any foulant immersed in a fluid. First-principles calculations of Hamaker constants are used to determine candidate coating materials. These materials are then tested in the first documented high temperature (315 C), high pressure (14 MPa), liquid cell atomic force microscope (HPAFM) capable of performing colloidal probe measurements at in-situ PWR pressure and temperature. The results are compared to flow loop tests, and the coating stability is tested in an irradiated flow loop with PWR spectrum. A set of promising coating materials is found, with the best candidates proven to reduce CRUD fouling by approximately an order of magnitude in a PWR-representative internally heated test flow loop.
MIT Department
Massachusetts Institute of Technology. Department of Nuclear Science and Engineering
Terms of Use
In Copyright - Educational Use Permitted
Copyright MIT
Persistent DSpace Link
