Using a gimbal to calibrate an inertial measurement unit
Name
83280846-MIT.pdf
Description
Full printable version
Size
7.66 MB
Format
Adobe PDF
Checksum (MD5)
7696b19378a24e8d1b4e720829a9c908
Author(s)
Reddy, Goutam
Advisor(s)
Hugh Herr.
Date Issued
2005
Publisher
Massachusetts Institute of Technology
Abstract
In this thesis, an inertial measurement unit (IMU) consisting of 3 accelerometers and 3 rate gyros is created using off-the-shelf sensors from STMicro and Analog Devices. A novel technique for calibrating the orientation, position, scaling and offset of each of the sensors on the IMU is developed. A gimbal consisting of three concentric rings, with rotary encoders measuring the rotation between rings is designed. The IMU is fixed to the inner ring of the gimbal and rotated in space. By sweeping appropriate orientations of the IMU at appropriate rates, filtered sensor values can be mapped to "true" angular velocities and linear accelerations computed from the gimbal rotations. The sensor parameters are estimated via. MMSE, and a Kalman filter is implemented to estimate the IMU's attitude (roll and pitch angles) from the raw sensor values. The calibrated sensors are found to track the pitch angle with a mean-square-error of 1.7427 degrees, and the roll angle with a mean-square-error of 3.1387 degrees. The novel outcome of this thesis is that it defines a technique for calibrating IMUs with component sensors that need not be orthogonal in placement.
Description
Thesis (M. Eng.)--Massachusetts Institute of Technology, Dept. of Electrical Engineering and Computer Science, 2005.
Includes bibliographical references (p. 79-82).
Subjects
Electrical Engineering and Computer Science.
MIT Department
Massachusetts Institute of Technology. Department of Electrical Engineering and Computer Science
Terms of Use
M.I.T. theses are protected by copyright. They may be viewed from this source for any purpose, but reproduction or distribution in any format is prohibited without written permission. See provided URL for inquiries about permission.
Persistent DSpace Link
