Effect of tethering chemistry of cationic surfactants on clay exfoliation, electrospinning and diameter of PMMA/clay nanocomposite fibers
Name
wang_101063R1_ms.pdf
Size
9.15 MB
Format
Adobe PDF
Checksum (MD5)
64bc12ee2cb153f36c8e90d1fdb6d32d
Author(s) • • •
Wang, M.
Yu, Jian H.
Hsieh, A. J.
Rutledge, Gregory C
Date Issued
October 2010
Journal
Polymer
Publisher
Elsevier
Citation
Wang, M., J.H. Yu, A.J. Hsieh, and G.C. Rutledge. “Effect of Tethering Chemistry of Cationic Surfactants on Clay Exfoliation, Electrospinning and Diameter of PMMA/clay Nanocomposite Fibers.” Polymer 51, no. 26 (December 2010): 6295–6302.
Version
Author's final manuscript
Abstract
We examine the influence of tethering chemistry of cationic surfactants on exfoliation of montmorillonite (MMT) clay dispersed in methyl methacrylate (MMA) followed by in-situ polymerization to form poly(methyl methacrylate) (PMMA) nanocomposites, the effect of exfoliation and clay loading on the rheology of polymer/clay dispersions in dimethyl formamide, and the diameters of nanocomposite fibers formed from these dispersions by electrospinning. Incorporation of an additional reactive tethering group of methacryl functionality significantly improves the intercalation and exfoliation of clays in both in-situ polymerized PMMA nanocomposites and the corresponding electrospun fibers. The proper surfactant chemistry also increases the dispersion stability, extensional viscosity, extent of strain hardening and thus the electrospinnablity of the nanocomposite dispersions, especially at low nanocomposite concentrations. The degree of the enhancement in electrospinnability by clays with proper tethering chemistry is at least the same as or greater than that obtained with three times higher loading level of clay particles without proper tethering chemistry in the nanocomposites. These results suggest a new strategy to produce smaller diameter fibers from very dilute polymer solutions, which are otherwise not electrospinnable, by incorporating a small amount of well-exfoliated clays.
MIT Department
Massachusetts Institute of Technology. Institute for Soldier Nanotechnologies
Massachusetts Institute of Technology. Department of Chemical Engineering
Terms of Use
Creative Commons Attribution-NonCommercial-NoDerivs License
Persistent DSpace Link
DOI of Published Version
https://doi.org/10.1016/j.polymer.2010.10.040