Linearly-acting variable-reluctance generator for thermoacoustic applications
Name
896160221-MIT.pdf
Description
Full printable version
Size
21.16 MB
Format
Adobe PDF
Checksum (MD5)
04b94e5a5a47d29daeb29c1f73fa7bb4
Author(s)
Knodel, Philip Clinton
Advisor(s)
John G. Brisson.
Date Issued
2014
Publisher
Massachusetts Institute of Technology
Abstract
Advances in battlefield equipment have created a demand for portable power systems with greater power density and more flexibility than current battery sources alone can provide. One potential solution lies in portable, high-frequency thermoacoustic engines, which can provide a battery recharge station or direct power supply for soldiers in-field, with the flexibility of operating on any quality heat source such as a butane heater. In this work, a linearly-acting variable-reluctance generator (VRG) is developed to act as a high-frequency (250 Hz) electro-acoustic transducer and extract electric power from a proposed thermoacoustic engine design. A computational model of the thermoacoustic engine was developed using DeltaEC to determine the feasibility of the concept and the necessary characteristics of the transducer element. The unique requirements of the high-frequency thermoacoustic engine led to the design, optimization, fabrication, and testing of the VRG, which is designed to operate resonantly in the thermoacoustic system and supported by a self-pumping gas bearing system. The VRG is uniquely suited to efficiently convert small amplitude mechanical oscillations (5 mm in this work) into electric power. Linear and nonlinear saturation models of the transducer were developed to optimize the VRG design and predict transducer performance in the thermoacoustic engine. The accuracy of these models was established by comparing simulation results to static experimental data and dynamic experimental data taken at 50-60 Hz oscillation frequency, testing one half of the full transducer. Experimental testing resulted in a maximum power output of 5.74 Watts with an efficiency of 55.8%. The results led to the conclusion that the transducer would function as designed in the thermoacoustic engine. Recommendations for future work and guidelines for future development of the engine, transducer, and bearing system are provided based on the design and results presented in this work.
Description
Thesis: S.M., Massachusetts Institute of Technology, Department of Mechanical Engineering, 2014.
Cataloged from PDF version of thesis.
Includes bibliographical references (pages 149-151).
Subjects
Mechanical Engineering.
MIT Department
Massachusetts Institute of Technology. Department of Mechanical Engineering
Terms of Use
M.I.T. theses are protected by copyright. They may be viewed from this source for any purpose, but reproduction or distribution in any format is prohibited without written permission. See provided URL for inquiries about permission.
Persistent DSpace Link
