https://hdl.handle.net/1721.1/53732 Sat, 04 Apr 2026 13:05:29 GMT 2026-04-04T13:05:29Z https://hdl.handle.net/1721.1/86934 MeshPerturb: MATLAB codes for mesh perturbation and automated pre and post processing of post-bifurcation analyses via COMSOL Saha, Sourabh K.; Culpepper, Martin L. Recently, there has been an interest in designing systems that employ buckling bifurcation as a desired mechanism to generate motion and/or form. As buckling has traditionally been considered a failure mode to be avoided, computational tools for predicting the state of the system after buckling are not well developed. For example, modules for post-bifurcation studies are not available in most of the commercial finite element software packages. Herein, we provide MATLAB codes that add the ability to perform post-bifurcation studies to the commercially available COMSOL finite element package. This is achieved by implementing mesh perturbations as a scheme to introduce geometric imperfections to the system. Additionally, we provide codes to automate pre/post processing the studies. These codes enable performing (i) post-bifurcation analysis, (ii) studies on sensitivity to mesh imperfections, and (iii) unattended parametric studies that require re-meshing the geometry. Sat, 10 May 2014 00:00:00 GMT https://hdl.handle.net/1721.1/86934 2014-05-10T00:00:00Z https://hdl.handle.net/1721.1/53734 Matlab Script for Generating Actuation Space Culpepper, Martin; Hopkins, Jonathan This Matlab code generates a flexure system's actuation space as well as the force and displacement actuator outputs for actuating a particular DOF Tue, 20 Apr 2010 20:35:33 GMT https://hdl.handle.net/1721.1/53734 2010-04-20T20:35:33Z