Digital material aerospace structures
Author(s)
Jenett, Benjamin (Benjamin Eric)
DownloadFull printable version (16.42Mb)
Other Contributors
Massachusetts Institute of Technology. Department of Civil and Environmental Engineering.
Advisor
Caitlin T. Mueller.
Terms of use
Metadata
Show full item recordAbstract
This thesis explores the design, fabrication, and performance of digital materials in aerospace structures in three areas: (1) a morphing wing design that adjusts its form to respond to different behavioral requirements; (2) an automated assembly method for truss column structures; and (3) an analysis of the payload and structural performance requirements of space structure elements made from digital materials. Aerospace structures are among the most difficult to design, engineer, and manufacture. Digital materials are discrete building block parts, reversibly joined, with a discrete set of positions and orientations. Aerospace structures built from digital materials have high performance characteristics that can surpass current technology, while also offering potential for analysis simplification and assembly automation. First, this thesis presents a novel approach for the design, analysis, and manufacturing of composite aerostructures through the use of digital materials. This approach can be used to create morphing wing structures with customizable structural properties, and the simplified composite fabrication strategy results in rapid manufacturing time with future potential for automation. The presented approach combines aircraft structure with morphing technology to accomplish tuned global deformation with a single degree of freedom actuator. Guidelines are proposed to design a digital material morphing wing, a prototype is manufactured and assembled, and preliminary experimental wind tunnel testing is conducted. Seconds, automatic deployment of structures has been a focus of much academic and industrial work on infrastructure applications and robotics in general. This thesis presents a robotic truss assembler designed for space applications - the Space Robot Universal Truss System (SpRoUTS) - that reversibly assembles a truss column from a feedstock of flat-packed components, by folding the sides of each component up and locking onto the assembled structure. The thesis describes the design and implementation of the robot and shows that an assembled truss compares favorably with prior truss deployment systems. Thirds, space structures are limited by launch shroud mass and volume constraints. Digital material space structures can be reversibly assembled on orbit by autonomous relative robots using discrete, incremental parts. This will enable the on-orbit assembly of larger space structures than currently possible. The engineering of these structures, from macro scale to discrete part scale, is presented. Comparison with traditional structural elements is shown and favorable mechanical performance as well as the ability to efficiently transport the material in a medium to heavy launch vehicle. In summary, this thesis contributes the methodology and evaluation of novel applications of digital materials in aerospace structures.
Description
Thesis: S.M., Massachusetts Institute of Technology, Department of Civil and Environmental Engineering, 2015. Cataloged from PDF version of thesis. Includes bibliographical references (pages 71-76).
Date issued
2015Department
Massachusetts Institute of Technology. Department of Civil and Environmental EngineeringPublisher
Massachusetts Institute of Technology
Keywords
Civil and Environmental Engineering.