| dc.contributor.author | Cordero, Zachary C. | |
| dc.contributor.author | Huskins, Emily L. | |
| dc.contributor.author | Park, Mansoo | |
| dc.contributor.author | Livers, Steven | |
| dc.contributor.author | Frary, Megan | |
| dc.contributor.author | Schuster, Brian E. | |
| dc.contributor.author | Schuh, Christopher A. | |
| dc.date.accessioned | 2016-06-23T21:19:51Z | |
| dc.date.available | 2016-06-23T21:19:51Z | |
| dc.date.issued | 2014-04 | |
| dc.identifier.issn | 1073-5623 | |
| dc.identifier.issn | 1543-1940 | |
| dc.identifier.uri | http://hdl.handle.net/1721.1/103306 | |
| dc.description.abstract | We report a W-rich alloy (W-7Cr-9Fe, at. pct) produced by high-energy ball milling, with alloying additions that both lower the densification temperature and retard grain growth. The alloy’s consolidation behavior and the resultant compacts’ microstructure and mechanical properties are explored. Under one condition, a 98 pct dense compact with a mean grain size of 130 nm was achieved, and exhibited a hardness of 13.5 GPa, a dynamic uniaxial yield strength of 4.14 GPa in Kolsky bar experiments, and signs of structural shear localization during deformation. | en_US |
| dc.description.sponsorship | United States. Defense Threat Reduction Agency (Grant No. HDTRA1-11-1-0062) | en_US |
| dc.description.sponsorship | United States. Department of Defense (NDSEG fellowship program) | en_US |
| dc.publisher | Springer US | en_US |
| dc.relation.isversionof | http://dx.doi.org/10.1007/s11661-014-2286-1 | en_US |
| dc.rights | Creative Commons Attribution-Noncommercial-Share Alike | en_US |
| dc.rights.uri | http://creativecommons.org/licenses/by-nc-sa/4.0/ | en_US |
| dc.source | Springer US | en_US |
| dc.title | Powder-Route Synthesis and Mechanical Testing of Ultrafine Grain Tungsten Alloys | en_US |
| dc.type | Article | en_US |
| dc.identifier.citation | Cordero, Zachary C. et al. “Powder-Route Synthesis and Mechanical Testing of Ultrafine Grain Tungsten Alloys.” Metallurgical and Materials Transactions A 45.8 (2014): 3609–3618. | en_US |
| dc.contributor.department | Massachusetts Institute of Technology. Department of Materials Science and Engineering | en_US |
| dc.contributor.mitauthor | Cordero, Zachary C. | en_US |
| dc.contributor.mitauthor | Park, Mansoo | en_US |
| dc.contributor.mitauthor | Schuh, Christopher A. | en_US |
| dc.relation.journal | Metallurgical and Materials Transactions A | en_US |
| dc.eprint.version | Author's final manuscript | en_US |
| dc.type.uri | http://purl.org/eprint/type/JournalArticle | en_US |
| eprint.status | http://purl.org/eprint/status/PeerReviewed | en_US |
| dc.date.updated | 2016-05-23T12:17:38Z | |
| dc.language.rfc3066 | en | |
| dc.rights.holder | The Minerals, Metals & Materials Society and ASM International | |
| dspace.orderedauthors | Cordero, Zachary C.; Huskins, Emily L.; Park, Mansoo; Livers, Steven; Frary, Megan; Schuster, Brian E.; Schuh, Christopher A. | en_US |
| dspace.embargo.terms | N | en |
| dc.identifier.orcid | https://orcid.org/0000-0002-1664-7939 | |
| dc.identifier.orcid | https://orcid.org/0000-0001-9856-2682 | |
| mit.license | OPEN_ACCESS_POLICY | en_US |
| mit.metadata.status | Complete | |
