dc.contributor.advisor | Emanuel M. Sachs. | en_US |
dc.contributor.author | Predergast, Patrick T | en_US |
dc.date.accessioned | 2005-08-17T23:53:58Z | |
dc.date.available | 2005-08-17T23:53:58Z | |
dc.date.copyright | 1995 | en_US |
dc.date.issued | 1995 | en_US |
dc.identifier.uri | http://hdl.handle.net/1721.1/11168 | |
dc.description | Thesis (B.S.)--Massachusetts Institute of Technology, Dept. of Mechanical Engineering, 1995. | en_US |
dc.description.statementofresponsibility | by Patrick T. Predergast. | en_US |
dc.format.extent | 19 leaves | en_US |
dc.format.extent | 1276726 bytes | |
dc.format.extent | 1276484 bytes | |
dc.format.mimetype | application/pdf | |
dc.format.mimetype | application/pdf | |
dc.language.iso | eng | en_US |
dc.publisher | Massachusetts Institute of Technology | en_US |
dc.rights | M.I.T. theses are protected by copyright. They may be viewed from this source for any purpose, but reproduction or distribution in any format is prohibited without written permission. See provided URL for inquiries about permission. | en_US |
dc.rights.uri | http://dspace.mit.edu/handle/1721.1/7582 | |
dc.subject | Mechanical Engineering | en_US |
dc.title | Powder removal from internal cavities of 3D printed parts | en_US |
dc.type | Thesis | en_US |
dc.description.degree | B.S. | en_US |
dc.contributor.department | Massachusetts Institute of Technology. Department of Mechanical Engineering | |
dc.identifier.oclc | 34405090 | en_US |