Show simple item record

dc.contributor.advisorJ. Brian Evans.en_US
dc.contributor.authorDorfman, Susannah Men_US
dc.contributor.otherMassachusetts Institute of Technology. Department of Earth, Atmospheric, and Planetary Sciences.en_US
dc.date.accessioned2018-03-12T19:30:28Z
dc.date.available2018-03-12T19:30:28Z
dc.date.copyright2005en_US
dc.date.issued2005en_US
dc.identifier.urihttp://hdl.handle.net/1721.1/114114
dc.descriptionThesis: S.B., Massachusetts Institute of Technology, Department of Earth, Atmospheric, and Planetary Sciences, 2005.en_US
dc.descriptionCataloged from PDF version of thesis. Pages 29-37, 42 and 46 not in original thesis.en_US
dc.descriptionIncludes bibliographical references (pages 44-48).en_US
dc.description.abstractWe explored two complementary mechanisms for change in porosity and permeability of geomaterials: thermal cracking and crack healing by diagenesis. A suite of thermal cracking experiments was performed on andesite plugs from the geothermal field in Awibengkok, Indonesia. Permeability (k) and specific storage capacity were measured by the oscillating flow method in a wide range permeameter, at room temperature, with effective pressures between 15 MPa and 95 MPa, before and after thermal cracking. The samples were cracked at 150 and 300 °C and ambient pressure. Andesite samples have low permeability, on the order of 10-²⁰ M² . With increased pressure, permeability is reduced by a factor of two. Contrary to expectations, thermal cracking reduced the permeability of this material by an order of magnitude. We also examined a set of samples from crack healing experiments performed on Sioux quartzite by M. Messar. In these experiments the quartzite permeability fell by three orders of magnitude within a few days when the samples were saturated with water and heated to temperatures from 300 to 500 °C and pressures from 25 to 200 MPa. In order to correlate Messar's permeability measurements and experimental conditions with visual observations of the pore structure (mainly consisting of grain boundary cracks), we took scanning electron microscope micrographs of the samples. We then counted the intersections of test lines with healed and unhealed cracks. This yielded a set of measurements of the crack area per volume of the quartzite. We found that the final permeability of the samples was related to the area per volume of unhealed cracks by a power relation. Combining the findings from the two sets of experiments, it seems that cracking and healing effects due to the ambient temperature and pressure in geothermal fields such as Awibengkok could eliminate any permeability through grain boundary scale cracks within a matter of days.en_US
dc.description.statementofresponsibilityby Susannah Dorfman.en_US
dc.format.extent48 pagesen_US
dc.language.isoengen_US
dc.publisherMassachusetts Institute of Technologyen_US
dc.rightsMIT theses are protected by copyright. They may be viewed, downloaded, or printed from this source but further reproduction or distribution in any format is prohibited without written permission.en_US
dc.rights.urihttp://dspace.mit.edu/handle/1721.1/7582en_US
dc.subjectEarth, Atmospheric, and Planetary Sciences.en_US
dc.titlePermeability modifying processes : thermal cracking and crack healing of geomaterialsen_US
dc.title.alternativeThermal cracking and crack healing of geomaterialsen_US
dc.typeThesisen_US
dc.description.degreeS.B.en_US
dc.contributor.departmentMassachusetts Institute of Technology. Department of Earth, Atmospheric, and Planetary Sciences
dc.identifier.oclc1027705402en_US


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record