An assessment of electric STOL aircraft
Author(s)
Courtin, Christopher B.(Christopher Bryce)
Download1143741009-MIT.pdf (17.30Mb)
Alternative title
Assessment of electric short takeoff and landing aircraft
Other Contributors
Massachusetts Institute of Technology. Department of Aeronautics and Astronautics.
Advisor
R. John Hansman.
Terms of use
Metadata
Show full item recordAbstract
Distributed electric propulsion (DEP) is an emerging set of technologies which enable new vehicle configurations by allowing the efficient distribution of many smaller propulsors around the airframe. One application of this technology is to greatly enhance the short takeoff and landing (STOL) capability of a fixed-wing aircraft. STOL aircraft may have advantages over vertical takeoff and land (VTOL) configurations being considered for urban passenger transport missions due to lower risk associated with the certification process and improved performance or reduced weight due to smaller required propulsion systems. To be useful for these missions, STOL vehicles require short-field performance competitive with vertical lift configurations. One pathway to achieving this is by placing many electric motors and propellers along the leading edge of the wing, an arrangement referred to as a DEP blown wing. This arrangement increases the effective lift of the wing through interaction of the propeller slipstream with the trailing edge flap. Previous blown wing concepts, based on large propellers or turbine engines, were mechanically complex and adopted only for specialized applications. A DEP blown wing offers a simpler and potentially more efficient way to enhance the high-lift capability of a wing, but the performance is not reliably predictable using existing theoretical or empirical methods. A wind tunnel test of a representative 2D blown wing section was undertaken, and section lift coefficient values up to 9 were measured at moderate power settings. The results of this wind tunnel testing were used to predict the takeoff and landing performance of reference vehicles with wing and power loading representative of modern GA aircraft. The results of this analysis suggest that a DEP blown wing may enable takeoff and landing ground rolls of less than 100 ft. Landing distance over a 50 ft obstacle is identified as the likely driver of runway requirements for a super-short takeoff and landing vehicle.
Description
Thesis: S.M., Massachusetts Institute of Technology, Department of Aeronautics and Astronautics, 2019 Cataloged from PDF version of thesis. Includes bibliographical references (pages 135-140).
Date issued
2019Department
Massachusetts Institute of Technology. Department of Aeronautics and AstronauticsPublisher
Massachusetts Institute of Technology
Keywords
Aeronautics and Astronautics.