Show simple item record

dc.contributor.advisorEmilio Baglietto.en_US
dc.contributor.authorCasel, Brian(Brian Scott)en_US
dc.contributor.otherMassachusetts Institute of Technology. Department of Nuclear Science and Engineering.en_US
dc.date.accessioned2021-02-19T20:40:56Z
dc.date.available2021-02-19T20:40:56Z
dc.date.copyright2020en_US
dc.date.issued2020en_US
dc.identifier.urihttps://hdl.handle.net/1721.1/129889
dc.descriptionThesis: S.M., Massachusetts Institute of Technology, Department of Nuclear Science and Engineering, February, 2020en_US
dc.descriptionCataloged from student-submitted PDF of thesis.en_US
dc.descriptionIncludes bibliographical references (pages 63-65).en_US
dc.description.abstractMore efficient boiling heat transfer systems in nuclear reactors can help lower the costs of a large, low carbon energy source. Multiphase computational fluid dynamics (M-CFD) can be utilized in the design of these systems, but requires additional modeling for interphase transfer of mass, momentum, and energy [1]. Within the momentum transfer between phases, the interfacial lift force strongly affects the lateral migration of the gas phase in bubbly flow, which strongly impacts the predictions of pressure drop and heat transfer [2]. Recent work from Sugrue has proposed an improved physical representation of the turbulent lift force utilizing a combination of direct numerical simulation (DNS) data and a numerical optimization of the lift coefficient using experimental data [3].en_US
dc.description.abstractThe resulting Sugrue lift model yielded consistent and improved predictions of lateral redistribution of the gas phase in adiabatic air-water experiments; however, application to developing, bubbly flow has shown there is potential to further improve the accuracy of the formulation [4, 5]. In this work, a systematic optimization to the turbulent lift model is performed to adjust the Sugrue model and a new turbulent lift model is proposed. Both formulations out-perform the original Sugrue model on the Hibiki [6] experiment and the new turbulent lift model marginally improves performance on the TOPFLOW [7] experiments. Additionally, machine learning methods including k-nearest neighbors, principal component analysis, linear regression, random forests, and neural networks, are used to analyze M-CFD data to highlight parameters for future modeling.en_US
dc.description.abstractThe linear regression and random forest methods both suggest that superficial liquid and gas velocities (J[subscript l] and J[subscript g]), and slip ratio (S) are the three most important variables for modeling the lift coefficient. Additional data is needed to extract more precise modeling information from the candidate machine learning models in future study.en_US
dc.description.statementofresponsibilityby Brian Casel.en_US
dc.format.extent94 pagesen_US
dc.language.isoengen_US
dc.publisherMassachusetts Institute of Technologyen_US
dc.rightsMIT theses may be protected by copyright. Please reuse MIT thesis content according to the MIT Libraries Permissions Policy, which is available through the URL provided.en_US
dc.rights.urihttp://dspace.mit.edu/handle/1721.1/7582en_US
dc.subjectNuclear Science and Engineering.en_US
dc.titleImproved turbulent lift momentum closure for multiphase computational fluid dynamicsen_US
dc.typeThesisen_US
dc.description.degreeS.M.en_US
dc.contributor.departmentMassachusetts Institute of Technology. Department of Nuclear Science and Engineeringen_US
dc.identifier.oclc1237645551en_US
dc.description.collectionS.M. Massachusetts Institute of Technology, Department of Nuclear Science and Engineeringen_US
dspace.imported2021-02-19T20:40:26Zen_US
mit.thesis.degreeMasteren_US
mit.thesis.departmentNucEngen_US


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record