| dc.contributor.advisor | Rahul Sarpeshkar. | en_US |
| dc.contributor.author | Good, Daniel (Daniel Albert), 1979- | en_US |
| dc.contributor.other | Massachusetts Institute of Technology. Dept. of Electrical Engineering and Computer Science. | en_US |
| dc.date.accessioned | 2005-05-19T14:59:14Z | |
| dc.date.available | 2005-05-19T14:59:14Z | |
| dc.date.copyright | 2002 | en_US |
| dc.date.issued | 2002 | en_US |
| dc.identifier.uri | http://hdl.handle.net/1721.1/16840 | |
| dc.description | Thesis (M.Eng. and S.B.)--Massachusetts Institute of Technology, Dept. of Electrical Engineering and Computer Science, 2002. | en_US |
| dc.description | Includes bibliographical references (leaves 72-73). | en_US |
| dc.description | This electronic version was submitted by the student author. The certified thesis is available in the Institute Archives and Special Collections. | en_US |
| dc.description.abstract | Anew possible commercial application for a micromachined accelerometer is for use in handheld devices such as personal digital assistants and cellular phones, as an intuitive method of data entry which does not consume space on the ever-shrinking exterior. These devices are battery powered, which imposes stringent power consumption limitations on any hardware added. To make an accelerometer a viable addition to a handheld device, a low power version was designed, with the other device parameters, such as measurement range and noise performance, tailored to be suitable for use in a handheld. The final design measures ±3 g's of acceleration with approximately 140 [mu]g/ [square root of]Hz of noise, consuming only 200 [mu]W of power. | en_US |
| dc.description.statementofresponsibility | by Daniel Good. | en_US |
| dc.format.extent | 73 leaves | en_US |
| dc.format.extent | 346548 bytes | |
| dc.format.extent | 346283 bytes | |
| dc.format.mimetype | application/pdf | |
| dc.format.mimetype | application/pdf | |
| dc.language.iso | eng | en_US |
| dc.publisher | Massachusetts Institute of Technology | en_US |
| dc.rights | M.I.T. theses are protected by copyright. They may be viewed from this source for any purpose, but reproduction or distribution in any format is prohibited without written permission. See provided URL for inquiries about permission. | en_US |
| dc.rights.uri | http://dspace.mit.edu/handle/1721.1/7582 | |
| dc.subject | Electrical Engineering and Computer Science. | en_US |
| dc.title | Design of a low power capacitive sensor for a micromachined accelerometer | en_US |
| dc.type | Thesis | en_US |
| dc.description.degree | M.Eng.and S.B. | en_US |
| dc.contributor.department | Massachusetts Institute of Technology. Department of Electrical Engineering and Computer Science | |
| dc.identifier.oclc | 51332334 | en_US |
