Show simple item record

dc.contributor.advisorErich Ippen and Hermann Haus.en_US
dc.contributor.authorGrein, Matthew Edward, 1970-en_US
dc.contributor.otherMassachusetts Institute of Technology. Dept. of Electrical Engineering and Computer Science.en_US
dc.date.accessioned2005-10-14T19:22:03Z
dc.date.available2005-10-14T19:22:03Z
dc.date.copyright2002en_US
dc.date.issued2002en_US
dc.identifier.urihttp://hdl.handle.net/1721.1/29237
dc.descriptionThesis (Ph. D.)--Massachusetts Institute of Technology, Dept. of Electrical Engineering and Computer Science, 2002.en_US
dc.descriptionIncludes bibliographical references (leaves 162-174).en_US
dc.description.abstractThe timing jitter of a modelocked laser is fundamentally limited by the amplified spontaneous emission in the laser cavity. While one cannot, even in principle, remove this source of noise, one does have control over the pulse timing by using filtering and modulation. In this thesis, we report on the advances made in developing the understanding of timing jitter and stability in actively modelocked soliton fiber lasers. The main achievements reported here are: the development of a theory for quantum-limited timing jitter for the cases of amplitude and phase modulation (AM and PM, respectively); identification of a set of characteristic coefficients governing the physics of pulse retiming that depend on the laser parameters; construction of an apparatus-including the development of harmonically modelocked soliton fiber lasers in both a ring and a sigma configuration-to measure the predicted coefficients; and residual phase-noise measurements of the quantum-limited timing jitter using homodyne detection. The measurements of the characteristic coefficients and the timing jitter were found to be in good agreement with the theory. In addition, a theory for the case of harmonic modelocking was developed, and it is shown that the supermodes reveal pulse-to-pulse correlation statistics and must be included in measurements and calculations of the timing jitter. For the case of uncorrelated timing jitter between different pulses in the laser cavity, the supermodes are predicted to have the same timing jitter spectrum as the baseband mode, and this is confirmed by measurements.en_US
dc.description.abstract(cont.) A scheme for reducing the timing jitter of a pulse train outside of the laser cavity using group-velocity dispersion and phase modulation is described, and it is shown theoretically that a reduction in the timing jitter is possible, but only at the expense of the carrier-frequency fluctuations. It is also shown that two-photon absorption in a semiconductor mirror structure prevented pulse dropouts in a short harmonically modelocked soliton fiber laser producing picosecond pulses at 2 GHz.en_US
dc.description.statementofresponsibilityby Matthew Edward Grein.en_US
dc.format.extent174 leavesen_US
dc.format.extent5549328 bytes
dc.format.extent5549136 bytes
dc.format.mimetypeapplication/pdf
dc.format.mimetypeapplication/pdf
dc.language.isoengen_US
dc.publisherMassachusetts Institute of Technologyen_US
dc.rightsM.I.T. theses are protected by copyright. They may be viewed from this source for any purpose, but reproduction or distribution in any format is prohibited without written permission. See provided URL for inquiries about permission.en_US
dc.rights.urihttp://dspace.mit.edu/handle/1721.1/7582
dc.subjectElectrical Engineering and Computer Science.en_US
dc.titleNoise and stability of actively modelocked fiber lasersen_US
dc.typeThesisen_US
dc.description.degreePh.D.en_US
dc.contributor.departmentMassachusetts Institute of Technology. Department of Electrical Engineering and Computer Science
dc.identifier.oclc51547726en_US


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record