Show simple item record

dc.contributor.advisorGeorge B. Benedek.en_US
dc.contributor.authorSmith, Brice Christopher, 1976-en_US
dc.contributor.otherMassachusetts Institute of Technology. Dept. of Physics.en_US
dc.date.accessioned2006-03-24T16:07:34Z
dc.date.available2006-03-24T16:07:34Z
dc.date.copyright2003en_US
dc.date.issued2003en_US
dc.identifier.urihttp://hdl.handle.net/1721.1/29610
dc.descriptionThesis (Ph. D.)--Massachusetts Institute of Technology, Dept. of Physics, 2003.en_US
dc.descriptionIncludes bibliographical references (p. 279-300).en_US
dc.description.abstractHelical ribbons with pitch angles of either 11⁰ or 54⁰ self-assemble in a wide variety of quaternary surfactant-phospholipid/fatty acid-sterol-water systems. In all of the systems studied, the thermodynamically stable state for the sterol is plate like mono-hydrate crystals. However, the sterol is typically found to pass through a serious of metastable intermediates from filaments to helical ribbons to tubules before reaching the stable crystalline state. In the present work, we chose to focus on helical ribbons formed in the Chemically Defined Lipid Concentrate (CDLC) system. These helices typically have radii on the order of a few to a few tens of microns and lengths on the order of hundreds of microns. By tethering to these mesoscopic helical ribbons using Devcon 5-Minute Epoxy®, we have been able to elastically deform them, and thus examine their response to uniaxial tension. For small deformations, the low pitch helices behave like linear elastic springs with a spring constant for a typical example measured to be (4.80 +/- 0.77) x 10-6 N/m. From the observed spread in helix dimension, our theory predicts a corresponding range of spring constants for the structures of 10-7 to 10-4 N/m allowing, in principle, a great range of forces to be examined. Under larger tensions, both low and high pitch helices have been observed to reversibly separate into a straight domain with a pitch angle of 90Ê» and a helical domain with a pitch angle of (16.5 +/1 1.3)⁰ for the low pitch or (59.6 +/- 1.7)⁰ for the high pitch. Using a newly developed continuum elastic free energy model, we have shown that this phenomena can be understood as a mechanical phase transition of first order.en_US
dc.description.abstract(cont.) From this analysis, we have also been able to determine all of the parameters within our model, and to show that it is capable of self-consistently and quantitatively explaining all of the observed properties of these self-assembled helices.en_US
dc.description.statementofresponsibilityby Brice Christopher Smith.en_US
dc.format.extent300 p.en_US
dc.format.extent15185244 bytes
dc.format.extent26908312 bytes
dc.format.mimetypeapplication/pdf
dc.format.mimetypeapplication/pdf
dc.language.isoengen_US
dc.publisherMassachusetts Institute of Technologyen_US
dc.rightsM.I.T. theses are protected by copyright. They may be viewed from this source for any purpose, but reproduction or distribution in any format is prohibited without written permission. See provided URL for inquiries about permission.en_US
dc.rights.urihttp://dspace.mit.edu/handle/1721.1/7582
dc.subjectPhysics.en_US
dc.titleGeometric and elastic properties and mechanical phase separation phenomena in self-assembling mesoscopic helical springsen_US
dc.typeThesisen_US
dc.description.degreePh.D.en_US
dc.contributor.departmentMassachusetts Institute of Technology. Department of Physics
dc.identifier.oclc53103719en_US


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record