dc.contributor.advisor | Samir A. Nayfeh. | en_US |
dc.contributor.author | Zuo, Lei, 1974- | en_US |
dc.contributor.other | Massachusetts Institute of Technology. Dept. of Mechanical Engineering. | en_US |
dc.date.accessioned | 2006-03-24T18:41:54Z | |
dc.date.available | 2006-03-24T18:41:54Z | |
dc.date.copyright | 2004 | en_US |
dc.date.issued | 2005 | en_US |
dc.identifier.uri | http://hdl.handle.net/1721.1/30341 | |
dc.description | Thesis (Ph. D.)--Massachusetts Institute of Technology, Dept. of Mechanical Engineering, February 2005. | en_US |
dc.description | Includes bibliographical references (p. 277-294). | en_US |
dc.description.abstract | This thesis focusses on broadband vibration isolation, with an emphasis on control of absolute payload motion for ultra-precision instruments such as the MIT/Caltech Laser-Interferometric Gravitational Wave Observatory (LIGO), which is designed to measure spatial strains on the order of 10-²¹. We develop novel passive elements and control strategies as well as a framework for concurrent design of the passive and active elements of single-stage and multi-stage isolation systems. In many applications, it is difficult to construct passive isolation systems compliant enough to achieve specifications on low-frequency ground transmission without introducing hysteresis as well as high-frequency transmission resonances. We develop and test a compliant support that employs a post-buckled structure in con- junction with a compliant spring to attain a low-frequency, low-static-sag mount in a compact package with a large range of travel and very clean dynamics. Most passive damping techniques increase ground transmission at high frequency, but tuned-mass dampers are decoupled from the ground. We explore the tuned-mass damper as a passive realization of the skyhook damper, obtain the optimal designs for multiple-SDOF systems of dampers, propose the concept of a multi-DOF damper, and show that MDOF dampers that couple translational and rotational motion have the potential to provide performance many times better than that traditional tuned-mass dampers. Active control can be used to improve low-frequency performance, but high-gain control can amplify sensor and actuator noise or cause instability. We study several control strategies for uncertain plants with high-order dynamics. | en_US |
dc.description.abstract | (cont.) In particular, we develop a novel control strategy, "model-reaching" adaptive control, that drives the system onto a dynamic manifold defined directly in terms of the states of the target. The method can be used to robustly increase the apparent compliance of an isolation mount and maintain a -40 dB/decade roll-off above the resulting corner frequency. | en_US |
dc.description.statementofresponsibility | by Lei Zuo. | en_US |
dc.format.extent | 294 p. | en_US |
dc.format.extent | 16013051 bytes | |
dc.format.extent | 16052294 bytes | |
dc.format.mimetype | application/pdf | |
dc.format.mimetype | application/pdf | |
dc.language.iso | eng | en_US |
dc.publisher | Massachusetts Institute of Technology | en_US |
dc.rights | M.I.T. theses are protected by copyright. They may be viewed from this source for any purpose, but reproduction or distribution in any format is prohibited without written permission. See provided URL for inquiries about permission. | en_US |
dc.rights.uri | http://dspace.mit.edu/handle/1721.1/7582 | |
dc.subject | Mechanical Engineering. | en_US |
dc.title | Element and system design for active and passive vibration isolation | en_US |
dc.type | Thesis | en_US |
dc.description.degree | Ph.D. | en_US |
dc.contributor.department | Massachusetts Institute of Technology. Department of Mechanical Engineering | |
dc.identifier.oclc | 61133953 | en_US |