Show simple item record

dc.contributor.advisorGeorge Haller.en_US
dc.contributor.authorAlam, Mohammad-Rezaen_US
dc.contributor.otherMassachusetts Institute of Technology. Dept. of Mechanical Engineering.en_US
dc.date.accessioned2006-03-29T18:38:59Z
dc.date.available2006-03-29T18:38:59Z
dc.date.copyright2005en_US
dc.date.issued2005en_US
dc.identifier.urihttp://hdl.handle.net/1721.1/32377
dc.descriptionThesis (S.M.)--Massachusetts Institute of Technology, Dept. of Mechanical Engineering, 2005.en_US
dc.descriptionIncludes bibliographical references (leaves 67-69).en_US
dc.description.abstractPrandtl (1904) showed that in a steady flow past a bluff body, streamlines separate from the boundary where the skin friction (or wall shear) vanishes and admits a negative gradient. Despite initial suggestions, however, it was recognized that Prandtl's zero-skin-friction criterion for separation is invalid for unsteady flows. Employing a Lagrangian approach, Haller (2004) derived an exact kinematic theory for unsteady separation in two-dimensional flows. This theory predicts separation at points where a weighted average of the skin-friction vanishes. The weight function in this criterion depends on quantities measured along the wall, and hence can be used in an active feedback control of separation. Feedback control has been shown to lead to performance improvement in a range of aerodynamic applications, but no rigorous feedback law has been constructed for lack of a detailed understanding of separation. In this work, we use a wall-reduced form of the vorticity-transport equation to design a feedback controller that enforces Haller's criteria-and hence induces separation- at prescribed boundary points. We also present a stability analysis of the controller, and explore alternative control strategies for separation. We use FLUENT to validate our controller numerically on a range of flows, including steady and unsteady channel flows and backward-facing step flows.en_US
dc.description.statementofresponsibilityby Mohammad-Reza.en_US
dc.format.extent86 leavesen_US
dc.format.extent3384825 bytes
dc.format.extent3388709 bytes
dc.format.mimetypeapplication/pdf
dc.format.mimetypeapplication/pdf
dc.language.isoengen_US
dc.publisherMassachusetts Institute of Technologyen_US
dc.rightsM.I.T. theses are protected by copyright. They may be viewed from this source for any purpose, but reproduction or distribution in any format is prohibited without written permission. See provided URL for inquiries about permission.en_US
dc.rights.urihttp://dspace.mit.edu/handle/1721.1/7582
dc.subjectMechanical Engineering.en_US
dc.titleFeedback control of separation in unsteady flowsen_US
dc.typeThesisen_US
dc.description.degreeS.M.en_US
dc.contributor.departmentMassachusetts Institute of Technology. Department of Mechanical Engineering
dc.identifier.oclc61516475en_US


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record