Show simple item record

dc.contributor.advisorTimothy McCoy.en_US
dc.contributor.authorPlumley, Michael Jen_US
dc.contributor.otherMassachusetts Institute of Technology. Dept. of Mechanical Engineering.en_US
dc.date.accessioned2006-07-31T15:13:56Z
dc.date.available2006-07-31T15:13:56Z
dc.date.copyright2005en_US
dc.date.issued2005en_US
dc.identifier.urihttp://hdl.handle.net/1721.1/33574
dc.descriptionThesis (S.M.)--Massachusetts Institute of Technology, Dept. of Ocean Engineering; and, Thesis (S.M.)--Massachusetts Institute of Technology, Dept. of Mechanical Engineering, 2005.en_US
dc.descriptionIncludes bibliographical references (p. 108-113).en_US
dc.description.abstractA detailed experimental study was conducted targeting lubricant consumption effects on ,diesel exhaust ash levels using a model year 2002 5.9L diesel engine, high and low Sulfur commercial lubricants, and clean diesel fuels. Regulatory decreases in allowable particulate matter emissions for on road diesel engines are driving industry to develop diesel particulate filters to trap and combust particulate. Remaining ash not combusted in this process clogs filters requiring engine down time and additional cleaning expenses. Recent reductions in fuel Sulfur and ash levels have also made lubricant consumption a significant relative contributor to particulate and ash generation. The goal of this study, a detailed understanding of lubricant contribution to particulate formation and ash transport, is required to enhance future filter design. 'The use of ultra clean fuels enhances accuracy of the Sulfur Dioxide tracer technique for estimating lubricant consumption and increases the relative contribution of lubricant to particulate emission. Results indicate the subject engine lubricant consumption is typical of others reported in literature. Particulate matter emission increases were measured after switching from a relatively low Sulfur, low sulfated ash oil to a high Sulfur, high sulfated ash lubricant.en_US
dc.description.abstract(cont.) Volatile organic fraction and ash emission rates measured using thermogravimetric analysis indicate exhaust ash increases correlate with increasing sulfated ash content and lubricant consumption. Increased exhaust Sulfur and wear metal debris can also increase relative ash in particulate. Particulate generated using high Sulfur fuels has a higher ash emission rate than that obtained using near zero Sulfur fuel. The consequences of on road emissions improvements will have a significant impact on -the marine industry in coming years. New emissions regulations are reducing allowable particulate emission from marine diesels for the first time, with adaptation of on road ·technologies for these applications expected in the near future.en_US
dc.description.statementofresponsibilityby Michael J. Plumley.en_US
dc.format.extent131 p.en_US
dc.format.extent8832895 bytes
dc.format.extent8838361 bytes
dc.format.mimetypeapplication/pdf
dc.format.mimetypeapplication/pdf
dc.language.isoengen_US
dc.publisherMassachusetts Institute of Technologyen_US
dc.rightsM.I.T. theses are protected by copyright. They may be viewed from this source for any purpose, but reproduction or distribution in any format is prohibited without written permission. See provided URL for inquiries about permission.en_US
dc.rights.urihttp://dspace.mit.edu/handle/1721.1/7582
dc.subjectOcean Engineering.en_US
dc.subjectMechanical Engineering.en_US
dc.titleLubricant oil consumption effects on diesel exhaust ash emissions using a sulfur dioxide trace technique and thermogravimetryen_US
dc.typeThesisen_US
dc.description.degreeS.M.en_US
dc.contributor.departmentMassachusetts Institute of Technology. Department of Mechanical Engineering
dc.contributor.departmentMassachusetts Institute of Technology. Department of Ocean Engineering
dc.identifier.oclc63517101en_US


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record