Show simple item record

dc.contributor.advisorDick K.P. Yue.en_US
dc.contributor.authorDong, Xiaoxia, S.M. Massachusetts Institute of Technologyen_US
dc.contributor.otherMassachusetts Institute of Technology. Dept. of Mechanical Engineering.en_US
dc.date.accessioned2007-08-29T20:47:47Z
dc.date.available2007-08-29T20:47:47Z
dc.date.copyright2007en_US
dc.date.issued2007en_US
dc.identifier.urihttp://hdl.handle.net/1721.1/38711
dc.descriptionThesis (S.M.)--Massachusetts Institute of Technology, Dept. of Mechanical Engineering, 2007.en_US
dc.descriptionIncludes bibliographical references (leaves 107-110).en_US
dc.description.abstractIn this thesis, we develop a numerical model to account for the leading-edge separation for the boundary element simulation of the oscillating foil with potential flow assumption. Similar to the trailing-edge separation, the leading-edge separation is modeled by a thin shear layer. Because the leading edge is rounded which is different from the sharp trailing edge, the location for leading-edge separation is extremely difficult to predetermine especially when the flow is unsteady. For unsteady flows, the position of the leading-edge separation may vary with time. However, we present a criterion that is related to the adverse pressure gradient to predict the location for the leading-edge separation. Because of the Lagrange scheme of the wake relaxation in the boundary element simulation, the leading-edge wake sheet goes into or through the thin foil easily. In order to solve the problem of the wake penetration into the foil, we present an algorithm to deal with the penetration of the leading-edge wake into the foil body. We simulate the oscillating foil in heaving-pitching motions with our leading-edge model by the boundary element method to compare with the experiments.en_US
dc.description.abstract(cont.) Without accounting for leading-edge separation, the predictions of the thrust coefficient and the propulsion efficiency of a heaving-pitching foil are good only when the Strouhal number or the maximum angle of attack is small. With our model of the leading-edge separation, the predictions are improved significantly at a larger range of Strouhal numbers or maximum angles of attack because leading-edge separation becomes significant at large Strouhal numbers or maximum angles of attack. Further possible improvements of this leading-edge separation model are discussed.en_US
dc.description.statementofresponsibilityby Xiaoxia Dong.en_US
dc.format.extent110 leavesen_US
dc.language.isoengen_US
dc.publisherMassachusetts Institute of Technologyen_US
dc.rightsM.I.T. theses are protected by copyright. They may be viewed from this source for any purpose, but reproduction or distribution in any format is prohibited without written permission. See provided URL for inquiries about permission.en_US
dc.rights.urihttp://dspace.mit.edu/handle/1721.1/7582
dc.subjectMechanical Engineering.en_US
dc.titleBoundary element simulation of oscillating foil with leading-edge separationen_US
dc.typeThesisen_US
dc.description.degreeS.M.en_US
dc.contributor.departmentMassachusetts Institute of Technology. Department of Mechanical Engineering
dc.identifier.oclc166145589en_US


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record