| dc.contributor.advisor | David Wallace. | en_US |
| dc.contributor.author | Hurwich, Andrew (Andrew B.) | en_US |
| dc.contributor.other | Massachusetts Institute of Technology. Dept. of Mechanical Engineering. | en_US |
| dc.date.accessioned | 2009-06-30T16:24:08Z | |
| dc.date.available | 2009-06-30T16:24:08Z | |
| dc.date.copyright | 2008 | en_US |
| dc.date.issued | 2008 | en_US |
| dc.identifier.uri | http://hdl.handle.net/1721.1/45836 | |
| dc.description | Thesis (S.B.)--Massachusetts Institute of Technology, Dept. of Mechanical Engineering, 2008. | en_US |
| dc.description | Includes bibliographical references. | en_US |
| dc.description.abstract | The toy industry holds a large portion of the American consumer market, and new products are in constant demand. A new mechanism for use in children's toys has been proposed to fire small plastic balls at a rate of over four hundred per minute. A portable, small, and safe power system must be developed for this mechanism before it is implemented in new children's products. Power requirements for the device have been estimated based on safety guidelines to be 12 Watts. This rate is feasibly supplied by a manually-compressed pressurized air system similar to systems currently used in watershooting children's toys. Such a system was incorporated into the new mechanism and subsequent tests confirmed this estimate. Test results demonstrated that the quality of air seals and the method of physically activating the mechanism are important areas of focus in next-level prototypes. This paper makes recommendations for improvements in these areas. | en_US |
| dc.description.statementofresponsibility | by Andrew Hurwich. | en_US |
| dc.format.extent | 20 p. | en_US |
| dc.language.iso | eng | en_US |
| dc.publisher | Massachusetts Institute of Technology | en_US |
| dc.rights | M.I.T. theses are protected by
copyright. They may be viewed from this source for any purpose, but
reproduction or distribution in any format is prohibited without written
permission. See provided URL for inquiries about permission. | en_US |
| dc.rights.uri | http://dspace.mit.edu/handle/1721.1/7582 | en_US |
| dc.subject | Mechanical Engineering. | en_US |
| dc.title | Power requirements for a rapid-fire projectile toy concept | en_US |
| dc.type | Thesis | en_US |
| dc.description.degree | S.B. | en_US |
| dc.contributor.department | Massachusetts Institute of Technology. Department of Mechanical Engineering | |
| dc.identifier.oclc | 319604014 | en_US |
