Show simple item record

dc.contributor.advisorFranz X. Kdrtner and Erich P. Ippen.en_US
dc.contributor.authorBenedick, Andrew Johnen_US
dc.contributor.otherMassachusetts Institute of Technology. Dept. of Electrical Engineering and Computer Science.en_US
dc.date.accessioned2011-09-27T18:30:54Z
dc.date.available2011-09-27T18:30:54Z
dc.date.copyright2011en_US
dc.date.issued2011en_US
dc.identifier.urihttp://hdl.handle.net/1721.1/66001
dc.descriptionThesis (Ph. D.)--Massachusetts Institute of Technology, Dept. of Electrical Engineering and Computer Science, 2011.en_US
dc.descriptionCataloged from PDF version of thesis. Vita.en_US
dc.descriptionIncludes bibliographical references (p. 179-186).en_US
dc.description.abstractFemtosecond mode-locked lasers are a unique laser technology due to their broad optical bandwidth and potential for linking the optical and radio frequency domains when these lasers are configured as frequency combs. Ti:Sapphire based mode-locked lasers offer considerable advantages over other laser systems by generating both the broadest optical spectrum and highest fundamental pulse repetition rates directly from the laser cavity. Recent advances in laser diode technology have reduced the cost of pump lasers for Ti:Sapphire based frequency combs considerably, and the recent demonstration of direct diode pumping of a narrowband mode-locked Ti:Sapphire laser suggests that Ti:Sapphire frequency combs may finally be ready to make the transition from an indispensible research tool to a wider set of industrial applications. In this thesis, several applications and fundamental properties of Ti:Sapphire based mode-locked lasers are investigated. To enable more widespread use of Ti:Sapphire based frequency combs, a frequency comb based on an octave spanning 1 GHz Ti:Sapphire laser is demonstrated. The I GHz Ti:Sapphire laser is referenced to a methane stabilized HeNe laser, resulting in a frequency comb with a fractional frequency stability of its optical spectrum of 2x1 0-14 on a 20 second timescale. A recently identified frequency comb application is the calibration of astronomical spectrographs to enable detection of Earth-like planets which are orbiting Sun-like stars. In support of this application, a second frequency comb system was constructed which ultimately was characterized by a 51 GHz pulse repetition rate and 12 nm bandwidth centered at 410 nm. This "astro-comb" system was deployed to the Fred Lawrence Whipple Observatory where preliminary results indicate a 40-fold increase in the spectrograph stability due to calibration by the astro-comb. Finally, the stability of the optical pulse train emitted from femtosecond mode-locked lasers is expected to exhibit the lowest phase noise of any oscillator, with theoretical predictions of phase noise levels below -190 dBc for offset frequencies exceeding 1 kHz. A comparison between the pulse trains of two nearly identical mode-locked lasers resulted in a measured timing error of less than 13 attoseconds measured over the entire Nyquist bandwidth.en_US
dc.description.statementofresponsibilityby Andrew John Benedick.en_US
dc.format.extent186 p.en_US
dc.language.isoengen_US
dc.publisherMassachusetts Institute of Technologyen_US
dc.rightsM.I.T. theses are protected by copyright. They may be viewed from this source for any purpose, but reproduction or distribution in any format is prohibited without written permission. See provided URL for inquiries about permission.en_US
dc.rights.urihttp://dspace.mit.edu/handle/1721.1/7582en_US
dc.subjectElectrical Engineering and Computer Science.en_US
dc.titleApplications and noise properties of high repetition rate : TiSapphire frequency combsen_US
dc.title.alternativeTiSapphire frequency combsen_US
dc.typeThesisen_US
dc.description.degreePh.D.en_US
dc.contributor.departmentMassachusetts Institute of Technology. Department of Electrical Engineering and Computer Science
dc.identifier.oclc751528299en_US


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record