Advanced Search

Trajectory and Force Control of a Direct Drive Arm

Research and Teaching Output of the MIT Community

Show simple item record An, Chae Hun en_US 2004-11-19T17:19:53Z 2004-11-19T17:19:53Z 1986-09-01 en_US
dc.identifier.other AITR-912 en_US
dc.description.abstract Using the MIT Serial Link Direct Drive Arm as the main experimental device, various issues in trajectory and force control of manipulators were studied in this thesis. Since accurate modeling is important for any controller, issues of estimating the dynamic model of a manipulator and its load were addressed first. Practical and effective algorithms were developed fro the Newton-Euler equations to estimate the inertial parameters of manipulator rigid-body loads and links. Load estimation was implemented both on PUMA 600 robot and on the MIT Serial Link Direct Drive Arm. With the link estimation algorithm, the inertial parameters of the direct drive arm were obtained. For both load and link estimation results, the estimated parameters are good models of the actual system for control purposes since torques and forces can be predicted accurately from these estimated parameters. The estimated model of the direct drive arm was them used to evaluate trajectory following performance by feedforward and computed torque control algorithms. The experimental evaluations showed that the dynamic compensation can greatly improve trajectory following accuracy. Various stability issues of force control were studied next. It was determined that there are two types of instability in force control. Dynamic instability, present in all of the previous force control algorithms discussed in this thesis, is caused by the interaction of a manipulator with a stiff environment. Kinematics instability is present only in the hybrid control algorithm of Raibert and Craig, and is caused by the interaction of the inertia matrix with the Jacobian inverse coordinate transformation in the feedback path. Several methods were suggested and demonstrated experimentally to solve these stability problems. The result of the stability analyses were then incorporated in implementing a stable force/position controller on the direct drive arm by the modified resolved acceleration method using both joint torque and wrist force sensor feedbacks. en_US
dc.format.extent 19292252 bytes
dc.format.extent 6920944 bytes
dc.format.mimetype application/postscript
dc.format.mimetype application/pdf
dc.language.iso en_US
dc.relation.ispartofseries AITR-912 en_US
dc.title Trajectory and Force Control of a Direct Drive Arm en_US

Files in this item

Name Size Format Description 18.39Mb Postscript
AITR-912.pdf 6.600Mb PDF

This item appears in the following Collection(s)

Show simple item record