Show simple item record

dc.contributor.authorSun, Z. Z.
dc.contributor.authorYoon, Soon Fatt
dc.contributor.authorYew, K. C.
dc.contributor.authorBo, B. X.
dc.contributor.authorYan, Du An
dc.contributor.authorTung, Chih-Hang
dc.date.accessioned2004-12-14T21:20:13Z
dc.date.available2004-12-14T21:20:13Z
dc.date.issued2005-01
dc.identifier.urihttp://hdl.handle.net/1721.1/7466
dc.description.abstractWe present the results of GaInNAs/GaAs quantum dot structures with GaAsN barrier layers grown by solid source molecular beam epitaxy. Extension of the emission wavelength of GaInNAs quantum dots by ~170nm was observed in samples with GaAsN barriers in place of GaAs. However, optimization of the GaAsN barrier layer thickness is necessary to avoid degradation in luminescence intensity and structural property of the GaInNAs dots. Lasers with GaInNAs quantum dots as active layer were fabricated and room-temperature continuous-wave lasing was observed for the first time. Lasing occurs via the ground state at ~1.2μm, with threshold current density of 2.1kA/cm[superscript 2] and maximum output power of 16mW. These results are significantly better than previously reported values for this quantum-dot system.en
dc.description.sponsorshipSingapore-MIT Alliance (SMA)en
dc.format.extent398089 bytes
dc.format.mimetypeapplication/pdf
dc.language.isoen
dc.relation.ispartofseriesInnovation in Manufacturing Systems and Technology (IMST);
dc.subjectGallium Arsenide Nitrideen
dc.subjectcontinuous-wave lasersen
dc.subjectquantum dot structuresen
dc.subjectArsenicen
dc.subjectGallium Arsenideen
dc.subjectGaAsN barrier layeren
dc.subjectGallium Indium Nitride Arsenideen
dc.subjectNitrogenen
dc.titleRoom-temperature continuous-wave operation of GaInNAs/GaAs quantum dot laser with GaAsN barrier grown by solid source molecular beam epitaxyen
dc.typeArticleen


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record