dc.contributor.advisor | Sanjay Sarma. | en_US |
dc.contributor.author | Reshamwala, Chetak M. (Chetak Mahesh), 1979- | en_US |
dc.contributor.other | Massachusetts Institute of Technology. Dept. of Mechanical Engineering. | en_US |
dc.date.accessioned | 2005-08-23T18:11:16Z | |
dc.date.available | 2005-08-23T18:11:16Z | |
dc.date.copyright | 2001 | en_US |
dc.date.issued | 2001 | en_US |
dc.identifier.uri | http://hdl.handle.net/1721.1/8193 | |
dc.description | Thesis (S.B.)--Massachusetts Institute of Technology, Dept. of Mechanical Engineering, 2001. | en_US |
dc.description | Includes bibliographical references (p. 21). | en_US |
dc.description.abstract | The purpose of this study was to determine a force-deflection relationship and a force-contact area relationship between a flat planar solid and a spherical solid in terms of material and surface properties of the two bodies. This relationship was determined and it was discovered that the force was directly proportional to both the deflection and contact area. This information is useful in the design and performance of RFID chips. The RFID chip-antenna interface is the area of greatest power loss in the system, and by determining a relationship to increase the contact area in that region, the power loss to the antenna can be reduced. Moreover, an analysis including asperities on the micro scale geometry of the solids was conducted. In the final approach to the problem, a random distribution of asperity types was analyzed. An expression was derived for the total force applied in terms of a given deflection and a range of asperity radii of curvature. A three-dimensional graph was created to show how each of these variables depends on the each other when asperities exist. This relationship is very significant, because it can be used to improve current RFID chip technology to achieve better performance. This expression can also be used to determine specifications in the manufacturing process to achieve a certain deflection or area of contact between the contacting bodies, thereby improving the current manufacturing process. | en_US |
dc.description.statementofresponsibility | by Chetak M. Reshamwala. | en_US |
dc.format.extent | 21 p. | en_US |
dc.format.extent | 1273533 bytes | |
dc.format.extent | 1273294 bytes | |
dc.format.mimetype | application/pdf | |
dc.format.mimetype | application/pdf | |
dc.language.iso | eng | en_US |
dc.publisher | Massachusetts Institute of Technology | en_US |
dc.rights | M.I.T. theses are protected by copyright. They may be viewed from this source for any purpose, but reproduction or distribution in any format is prohibited without written permission. See provided URL for inquiries about permission. | en_US |
dc.rights.uri | http://dspace.mit.edu/handle/1721.1/7582 | |
dc.subject | Mechanical Engineering. | en_US |
dc.title | Contact resistance in RFID chip-antenna interfaces | en_US |
dc.title.alternative | Contact resistance in radio frequency identification systems chip-antenna interfaces | en_US |
dc.type | Thesis | en_US |
dc.description.degree | S.B. | en_US |
dc.contributor.department | Massachusetts Institute of Technology. Department of Mechanical Engineering | |
dc.identifier.oclc | 50078808 | en_US |