| dc.contributor.advisor | Wojciech Matusik. | en_US |
| dc.contributor.author | Ramos-Maltés, Javier Eduardo | en_US |
| dc.contributor.other | Massachusetts Institute of Technology. Department of Mechanical Engineering. | en_US |
| dc.date.accessioned | 2014-12-08T18:50:57Z | |
| dc.date.available | 2014-12-08T18:50:57Z | |
| dc.date.copyright | 2014 | en_US |
| dc.date.issued | 2014 | en_US |
| dc.identifier.uri | http://hdl.handle.net/1721.1/92130 | |
| dc.description | Thesis: S.M., Massachusetts Institute of Technology, Department of Mechanical Engineering, 2014. | en_US |
| dc.description | Cataloged from PDF version of thesis. | en_US |
| dc.description | Includes bibliographical references (pages 62-64). | en_US |
| dc.description.abstract | This thesis presents the development of MultiFab, a multi-material 3D printing architecture that is high-resolution, scalable, and low-cost. MultiFab enables the 3D printing of parts with materials that interact optically and mechanically. The hardware is low-cost since it is built almost exclusively from off-the-shelf components. The system uses commercial piezoelectric printheads that enable multi-material 3D printing with a resolution of at least 40 [mu]m. This thesis presents the design and fabrication of MiniFab, a 3D printer that implements the MultiFab architecture, and its key subsystems, including novel material feeding and UV LED curing systems. Additionally, results show that the printer is capable of producing multi-material parts for a wide variety of applications.. | en_US |
| dc.description.statementofresponsibility | by Javier Eduardo Ramos-Maltés. | en_US |
| dc.format.extent | 64 pages | en_US |
| dc.language.iso | eng | en_US |
| dc.publisher | Massachusetts Institute of Technology | en_US |
| dc.rights | M.I.T. theses are protected by copyright. They may be viewed from this source for any purpose, but reproduction or distribution in any format is prohibited without written permission. See provided URL for inquiries about permission. | en_US |
| dc.rights.uri | http://dspace.mit.edu/handle/1721.1/7582 | en_US |
| dc.subject | Mechanical Engineering. | en_US |
| dc.title | MultiFab : a multi-material 3D printing platform | en_US |
| dc.title.alternative | Multi Fab : a multi-material 3D printing platform | en_US |
| dc.title.alternative | Multi-material 3D printing platform | en_US |
| dc.title.alternative | Multi-material 3-dimensional printing platform | en_US |
| dc.title.alternative | Multi-material three-dimensional printing platform | en_US |
| dc.type | Thesis | en_US |
| dc.description.degree | S.M. | en_US |
| dc.contributor.department | Massachusetts Institute of Technology. Department of Mechanical Engineering | |
| dc.identifier.oclc | 896121503 | en_US |
