| dc.contributor.advisor | Amos G. Winter V. | en_US |
| dc.contributor.author | Martin, Ian (Ian P.) | en_US |
| dc.contributor.other | Massachusetts Institute of Technology. Department of Mechanical Engineering. | en_US |
| dc.date.accessioned | 2014-12-08T18:55:45Z | |
| dc.date.available | 2014-12-08T18:55:45Z | |
| dc.date.copyright | 2014 | en_US |
| dc.date.issued | 2014 | en_US |
| dc.identifier.uri | http://hdl.handle.net/1721.1/92194 | |
| dc.description | Thesis: S.B., Massachusetts Institute of Technology, Department of Mechanical Engineering, 2014. | en_US |
| dc.description | Cataloged from PDF version of thesis. | en_US |
| dc.description | Includes bibliographical references (page 21). | en_US |
| dc.description.abstract | Different fabrication methods are evaluated for producing pressure-compensating tubes for use in low-pressure drip irrigation systems. Such devices would allow drip irrigation systems to operate at driving pressures much lower than those required by current available technology, allowing for cost and water savings in developing nations. Fabrication methods explored consist mainly of molding of liquid silicone rubber and production from existing silicone stock by folding or binding multiple sheets of material together. Based on small-scale production and testing, the sheet fabrication method showed some promise of equaling the performance of the injection-molded tubes, but both methods require further refinement going forward. | en_US |
| dc.description.statementofresponsibility | by Ian Martin. | en_US |
| dc.format.extent | 21 pages | en_US |
| dc.language.iso | eng | en_US |
| dc.publisher | Massachusetts Institute of Technology | en_US |
| dc.rights | M.I.T. theses are protected by copyright. They may be viewed from this source for any purpose, but reproduction or distribution in any format is prohibited without written permission. See provided URL for inquiries about permission. | en_US |
| dc.rights.uri | http://dspace.mit.edu/handle/1721.1/7582 | en_US |
| dc.subject | Mechanical Engineering. | en_US |
| dc.title | Design and fabrication of pressure-compensating compliant tubes | en_US |
| dc.type | Thesis | en_US |
| dc.description.degree | S.B. | en_US |
| dc.contributor.department | Massachusetts Institute of Technology. Department of Mechanical Engineering | |
| dc.identifier.oclc | 897211353 | en_US |
