Show simple item record

dc.contributor.advisorVictor Wong.en_US
dc.contributor.authorTracy, Ian Pen_US
dc.contributor.otherMassachusetts Institute of Technology. Department of Mechanical Engineering.en_US
dc.date.accessioned2015-09-17T17:44:18Z
dc.date.available2015-09-17T17:44:18Z
dc.date.copyright2015en_US
dc.date.issued2015en_US
dc.identifier.urihttp://hdl.handle.net/1721.1/98583
dc.descriptionThesis: S.M. in Technology and Policy, Massachusetts Institute of Technology, Engineering Systems Division, Technology and Policy Program, 2015.en_US
dc.descriptionThesis: S.M., Massachusetts Institute of Technology, Department of Mechanical Engineering, 2015.en_US
dc.descriptionThis electronic version was submitted by the student author. The certified thesis is available in the Institute Archives and Special Collections.en_US
dc.descriptionCataloged from student-submitted PDF version of thesis.en_US
dc.descriptionIncludes bibliographical references (pages 74-75).en_US
dc.description.abstractNumerical and experimental studies were performed on an internal combustion engine power cylinder wall's lubricating oil film in order to assess the possibility of tailoring engine lubricants to specific engine configurations and operating conditions for significantly enhanced fuel economy without an accompanying increase in engine wear. An array of different base oil viscosity modifier type combinations were developed, tested, and analyzed in order to seek trends that link lubricant mixtures to certain rheological behaviors along the cylinder wall of a fired internal combustion engine. Viscosity modifiers were applied in an unconventional manner so as to increase viscosity at high operating temperatures rather than decreasing viscosity at low temperatures for promoting reliable cold-cranking. Consequently, a novel form of multi-grade lubricant was developed and simulated for determining potential fuel economy gains through its use. Both numerical simulation and a physical, laser-induced fluorescence diagnostic apparatus for an Isuzu 4JJ1 light-duty diesel engine were implemented in parallel to aid the development and validation of a reliable engine friction and wear model. Preliminary results have been insightful and coincident with classical continuum mechanics theory. Internal consistency across the developed model and physical diagnostics was considerable. It is concluded that the tailoring of lubricant formulations can realize substantial fuel economy gains, and that oil & gas companies may realize significant competitive advantage and profit should they successfully inspire customers to consider purchasing lubricants that have been designed specifically for their automobile and driving habits. It is further proposed that the standards associated with lubricant classification be improved so as to consider the use of viscosity modifiers as mitigators of engine power cylinder wear at high cylinder temperatures near top dead center (TDC).en_US
dc.description.statementofresponsibilityby Ian P. Tracy.en_US
dc.format.extentx, 82 pagesen_US
dc.language.isoengen_US
dc.publisherMassachusetts Institute of Technologyen_US
dc.rightsM.I.T. theses are protected by copyright. They may be viewed from this source for any purpose, but reproduction or distribution in any format is prohibited without written permission. See provided URL for inquiries about permission.en_US
dc.rights.urihttp://dspace.mit.edu/handle/1721.1/7582en_US
dc.subjectEngineering Systems Division.en_US
dc.subjectTechnology and Policy Program.en_US
dc.subjectMechanical Engineering.en_US
dc.titleEnhanced engine mechanical efficiency through tailoring of lubricant formulations to localized power cylinder wall conditionsen_US
dc.typeThesisen_US
dc.description.degreeS.M. in Technology and Policyen_US
dc.description.degreeS.M.en_US
dc.contributor.departmentMassachusetts Institute of Technology. Engineering Systems Divisionen_US
dc.contributor.departmentMassachusetts Institute of Technology. Department of Mechanical Engineeringen_US
dc.contributor.departmentTechnology and Policy Program
dc.identifier.oclc921140910en_US


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record