2026-09-18T19:04:40Zhttps://dspace.mit.edu/server/oai/requestoai:dspace.mit.edu:1721.1/1391292022-01-15T03:38:42Zcom_1721.1_7582com_1721.1_7581col_1721.1_131023
Jonart, Douglas
Ricard, Michael J.
Rico, Catalina Kim Le
Massachusetts Institute of Technology. Department of Mechanical Engineering
2022-01-14T14:51:40Z
2022-01-14T14:51:40Z
2021-06
2021-06-30T15:37:49.613Z
https://hdl.handle.net/1721.1/139129
Glass insulated underwater connectors allow for deep sea exploration. However, the long term reliability of the insulation is reduced due to surface cracks formed during manufacturing. In this thesis, we propose and test a sealant to overcome limitations associated with internal cracks. The need for a sealant was identified following a series of experimental tests simulating environmental, operational, and human handling conditions. Analysis shows there is an insignificant effect of insulation resistance attributed to any undetectable crack growth formed during operational and handling conditions. Seawater intrusion, however, is determined to be the primary failure mode. An extensive cleaning procedure allows for partial recovery from salt damage, although the process is unsuitable for field maintenance. We show promising test results in easing cleaning requirements for a recoverable connector by applying a polyurethane sealant to the connector face.
S.M.
Massachusetts Institute of Technology
In Copyright - Educational Use Permitted
Copyright retained by author(s)
https://rightsstatements.org/page/InC-EDU/1.0/
Polyurethane Sealant to Mitigate Crack Effects in Glass-to-Metal Sealed Underwater Connectors
Thesis
application/pdf
Master
Master of Science in Mechanical Engineering
Publication
unknown
unknown
<Publication xmlns="https://www.openaire.eu/cerif-profile/1.1/" id="6c85fc54-9633-41a4-90d2-333f176fb66b">
<Type xmlns="https://www.openaire.eu/cerif-profile/vocab/COAR_Publication_Types">http://purl.org/coar/resource_type/c_1843</Type>
<Title>Polyurethane Sealant to Mitigate Crack Effects in Glass-to-Metal Sealed Underwater Connectors</Title>
<PublishedIn>
<Publication>
</Publication>
</PublishedIn>
<PublicationDate>2021-06</PublicationDate>
<Authors>
<Author>
<DisplayName>Rico, Catalina Kim Le</DisplayName>
<Affiliation>
<OrgUnit>
</OrgUnit>
</Affiliation>
</Author>
</Authors>
<Editors>
</Editors>
<Publishers>
<Publisher>
<DisplayName>Massachusetts Institute of Technology</DisplayName>
<OrgUnit />
</Publisher>
</Publishers>
<License>https://rightsstatements.org/page/InC-EDU/1.0/</License>
<Abstract>Glass insulated underwater connectors allow for deep sea exploration. However, the long term reliability of the insulation is reduced due to surface cracks formed during manufacturing. In this thesis, we propose and test a sealant to overcome limitations associated with internal cracks. The need for a sealant was identified following a series of experimental tests simulating environmental, operational, and human handling conditions. Analysis shows there is an insignificant effect of insulation resistance attributed to any undetectable crack growth formed during operational and handling conditions. Seawater intrusion, however, is determined to be the primary failure mode. An extensive cleaning procedure allows for partial recovery from salt damage, although the process is unsuitable for field maintenance. We show promising test results in easing cleaning requirements for a recoverable connector by applying a polyurethane sealant to the connector face.</Abstract>
<Access xmlns="http://purl.org/coar/access_right"
>
</Access>
</Publication>