2026-09-19T15:59:58Zhttps://dspace.mit.edu/server/oai/requestoai:dspace.mit.edu:1721.1/1472372023-01-20T03:17:58Zcom_1721.1_7582com_1721.1_7581col_1721.1_131023
Eagar, Thomas W.
Moriarty, Daniel P.
Massachusetts Institute of Technology. Department of Mechanical Engineering
Massachusetts Institute of Technology. Department of Materials Science and Engineering
2023-01-19T18:39:24Z
2023-01-19T18:39:24Z
2022-09
2022-11-04T16:21:28.068Z
https://hdl.handle.net/1721.1/147237
Activated aluminum is a fuel source that promises safe hydrogen energy storage with volumetric energy densities twice that of diesel fuel and 45 times that of lithium-ion batteries. Aluminum is activated when liquid eutectic gallium-indium disrupts the aluminum’s passive oxide layer, enabling a reaction with water to release hydrogen gas and heat. This thesis seeks further understanding of this reaction by exploring the effect of residual stresses in the aluminum. Annealing and cold rolling of 1100-alloy aluminum plate developed engineering strain levels up to -0.7. Reactions in both DI water and water with 3.5% NaCl salinity and 0.1M caffeine dopant showed no correlation between hydrogen production and strain but an aggressive acceleration of the reaction with increased strain levels. Some reactions produced unreacted aluminum in the product, most notably for high strain level (-0.4 – -0.6) reactions in DI water. The unreacted products, confirmed to be aluminum by SEM-EDS, fully reacted over 24 hours. Using SEM to inspect the first stages of microstructural reaction mechanisms, higher amounts of exfoliated aluminum were expelled from the bulk at high (-0.6) strain levels compared to unstrained (0.0) samples. These observations further understanding of how strain conditions affect activated aluminum reactions and help delineate ideal operating conditions for reactor design.
S.M.
S.M.
Massachusetts Institute of Technology
In Copyright - Educational Use Permitted
Copyright MIT
http://rightsstatements.org/page/InC-EDU/1.0/
Effects of Strain on Activated-Aluminum–Water Reactions
Thesis
application/pdf
Master
Master of Science in Materials Science and Engineering
Master of Science in Mechanical Engineering
Publication
unknown
unknown
<Publication xmlns="https://www.openaire.eu/cerif-profile/1.1/" id="b8232a32-2da2-4af8-af98-8bd6c5d6ca41">
<Type xmlns="https://www.openaire.eu/cerif-profile/vocab/COAR_Publication_Types">http://purl.org/coar/resource_type/c_1843</Type>
<Title>Effects of Strain on Activated-Aluminum–Water Reactions</Title>
<PublishedIn>
<Publication>
</Publication>
</PublishedIn>
<PublicationDate>2022-09</PublicationDate>
<Authors>
<Author>
<DisplayName>Moriarty, Daniel P.</DisplayName>
<Affiliation>
<OrgUnit>
</OrgUnit>
</Affiliation>
</Author>
</Authors>
<Editors>
</Editors>
<Publishers>
<Publisher>
<DisplayName>Massachusetts Institute of Technology</DisplayName>
<OrgUnit />
</Publisher>
</Publishers>
<License>http://rightsstatements.org/page/InC-EDU/1.0/</License>
<Abstract>Activated aluminum is a fuel source that promises safe hydrogen energy storage with volumetric energy densities twice that of diesel fuel and 45 times that of lithium-ion batteries. Aluminum is activated when liquid eutectic gallium-indium disrupts the aluminum’s passive oxide layer, enabling a reaction with water to release hydrogen gas and heat. This thesis seeks further understanding of this reaction by exploring the effect of residual stresses in the aluminum. Annealing and cold rolling of 1100-alloy aluminum plate developed engineering strain levels up to -0.7. Reactions in both DI water and water with 3.5% NaCl salinity and 0.1M caffeine dopant showed no correlation between hydrogen production and strain but an aggressive acceleration of the reaction with increased strain levels. Some reactions produced unreacted aluminum in the product, most notably for high strain level (-0.4 – -0.6) reactions in DI water. The unreacted products, confirmed to be aluminum by SEM-EDS, fully reacted over 24 hours. Using SEM to inspect the first stages of microstructural reaction mechanisms, higher amounts of exfoliated aluminum were expelled from the bulk at high (-0.6) strain levels compared to unstrained (0.0) samples. These observations further understanding of how strain conditions affect activated aluminum reactions and help delineate ideal operating conditions for reactor design.</Abstract>
<Access xmlns="http://purl.org/coar/access_right"
>
</Access>
</Publication>