2026-09-19T13:16:15Zhttps://dspace.mit.edu/server/oai/requestoai:dspace.mit.edu:1721.1/1565642024-09-04T03:32:56Zcom_1721.1_7582com_1721.1_7581col_1721.1_131024
Hardt, David
Godfrey, Tyler
Massachusetts Institute of Technology. Department of Mechanical Engineering
2024-09-03T21:07:48Z
2024-09-03T21:07:48Z
2024-05
2024-07-10T17:33:26.564Z
https://hdl.handle.net/1721.1/156564
There are 1.6 billion people in the world that lack adequate housing. An enormous amount of plastic is produced in the world; most of it doesn’t get recycled. The MIT HAUS group is looking to solve both of those issues by 3D printing homes out of recycled plastic. The group has printed foundation components using thermoplastic composites. The HAUS group is working from the ground up, so following the foundation would be a floor. This thesis specifically looks at the design of floor joists, the beams under the floor supporting the floor. In trying to build homes for those that lack adequate shelter, the MIT HAUS group has to design to minimize cost. The design of the floor joists seeks to minimize cost by designing a thin joist. These thin designs minimize both weight and production time. The floor joists are trusses, with different designs varying different parameters, such as the number of triangles in the beam. The designs were put through FEA simulation and small scale testing to determine the best design. Lastly, full large scale trusses for the selected design were printed on a BAAM by Additive Engineering Solutions and tested under typical floor loading conditions. Both simulation and test were in good agreement and the mid-span deflection was found to be well within accepted building standards. Key Words: 3D Printing, Floor Joists, Truss, Recycled Plastic
S.B.
Massachusetts Institute of Technology
In Copyright - Educational Use Permitted
Copyright retained by author(s)
https://rightsstatements.org/page/InC-EDU/1.0/
Design of Floor Joists Manufactured via Large Scale Additive
Manufacturing
Thesis
application/pdf
Bachelor
Bachelor of Science in Mechanical Engineering
Publication
unknown
unknown
<Publication xmlns="https://www.openaire.eu/cerif-profile/1.1/" id="804acd7e-d2ab-4cc7-8680-eafcf46ad344">
<Type xmlns="https://www.openaire.eu/cerif-profile/vocab/COAR_Publication_Types">http://purl.org/coar/resource_type/c_1843</Type>
<Title>Design of Floor Joists Manufactured via Large Scale Additive
Manufacturing</Title>
<PublishedIn>
<Publication>
</Publication>
</PublishedIn>
<PublicationDate>2024-05</PublicationDate>
<Authors>
<Author>
<DisplayName>Godfrey, Tyler</DisplayName>
<Affiliation>
<OrgUnit>
</OrgUnit>
</Affiliation>
</Author>
</Authors>
<Editors>
</Editors>
<Publishers>
<Publisher>
<DisplayName>Massachusetts Institute of Technology</DisplayName>
<OrgUnit />
</Publisher>
</Publishers>
<License>https://rightsstatements.org/page/InC-EDU/1.0/</License>
<Abstract>There are 1.6 billion people in the world that lack adequate housing. An enormous amount of plastic is produced in the world; most of it doesn’t get recycled. The MIT HAUS group is looking to solve both of those issues by 3D printing homes out of recycled plastic. The group has printed foundation components using thermoplastic composites. The HAUS group is working from the ground up, so following the foundation would be a floor. This thesis specifically looks at the design of floor joists, the beams under the floor supporting the floor. In trying to build homes for those that lack adequate shelter, the MIT HAUS group has to design to minimize cost. The design of the floor joists seeks to minimize cost by designing a thin joist. These thin designs minimize both weight and production time. The floor joists are trusses, with different designs varying different parameters, such as the number of triangles in the beam. The designs were put through FEA simulation and small scale testing to determine the best design. Lastly, full large scale trusses for the selected design were printed on a BAAM by Additive Engineering Solutions and tested under typical floor loading conditions. Both simulation and test were in good agreement and the mid-span deflection was found to be well within accepted building standards. Key Words: 3D Printing, Floor Joists, Truss, Recycled Plastic</Abstract>
<Access xmlns="http://purl.org/coar/access_right"
>
</Access>
</Publication>