2026-09-19T06:14:16Zhttps://dspace.mit.edu/server/oai/requestoai:dspace.mit.edu:1721.1/168402026-06-06T01:04:24Zcom_1721.1_7582com_1721.1_7581col_1721.1_131023
Rahul Sarpeshkar.
Good, Daniel (Daniel Albert), 1979-
Massachusetts Institute of Technology. Dept. of Electrical Engineering and Computer Science.
Massachusetts Institute of Technology. Department of Electrical Engineering and Computer Science
2005-05-19T14:59:14Z
2005-05-19T14:59:14Z
2002
2002
http://hdl.handle.net/1721.1/16840
51332334
Thesis (M.Eng. and S.B.)--Massachusetts Institute of Technology, Dept. of Electrical Engineering and Computer Science, 2002.
Includes bibliographical references (leaves 72-73).
This electronic version was submitted by the student author. The certified thesis is available in the Institute Archives and Special Collections.
Anew possible commercial application for a micromachined accelerometer is for use in handheld devices such as personal digital assistants and cellular phones, as an intuitive method of data entry which does not consume space on the ever-shrinking exterior. These devices are battery powered, which imposes stringent power consumption limitations on any hardware added. To make an accelerometer a viable addition to a handheld device, a low power version was designed, with the other device parameters, such as measurement range and noise performance, tailored to be suitable for use in a handheld. The final design measures ±3 g's of acceleration with approximately 140 [mu]g/ [square root of]Hz of noise, consuming only 200 [mu]W of power.
by Daniel Good.
M.Eng.
S.B.
73 leaves
346548 bytes
346283 bytes
application/pdf
application/pdf
eng
Massachusetts Institute of Technology
M.I.T. theses are protected by copyright. They may be viewed from this source for any purpose, but reproduction or distribution in any format is prohibited without written permission. See provided URL for inquiries about permission.
http://dspace.mit.edu/handle/1721.1/7582
Electrical Engineering and Computer Science.
Design of a low power capacitive sensor for a micromachined accelerometer
Thesis
application/pdf
Publication
unknown
unknown
<Publication xmlns="https://www.openaire.eu/cerif-profile/1.1/" id="5a65141d-1054-4a8a-bd82-c376c2c7f0f5">
<Type xmlns="https://www.openaire.eu/cerif-profile/vocab/COAR_Publication_Types">http://purl.org/coar/resource_type/c_1843</Type>
<Language>eng</Language>
<Title>Design of a low power capacitive sensor for a micromachined accelerometer</Title>
<PublishedIn>
<Publication>
</Publication>
</PublishedIn>
<PublicationDate>2002</PublicationDate>
<Authors>
<Author>
<DisplayName>Good, Daniel (Daniel Albert), 1979-</DisplayName>
<Affiliation>
<OrgUnit>
</OrgUnit>
</Affiliation>
</Author>
</Authors>
<Editors>
</Editors>
<Publishers>
<Publisher>
<DisplayName>Massachusetts Institute of Technology</DisplayName>
<OrgUnit />
</Publisher>
</Publishers>
<License>http://dspace.mit.edu/handle/1721.1/7582</License>
<Keyword>Electrical Engineering and Computer Science.</Keyword>
<Abstract>Anew possible commercial application for a micromachined accelerometer is for use in handheld devices such as personal digital assistants and cellular phones, as an intuitive method of data entry which does not consume space on the ever-shrinking exterior. These devices are battery powered, which imposes stringent power consumption limitations on any hardware added. To make an accelerometer a viable addition to a handheld device, a low power version was designed, with the other device parameters, such as measurement range and noise performance, tailored to be suitable for use in a handheld. The final design measures ±3 g's of acceleration with approximately 140 [mu]g/ [square root of]Hz of noise, consuming only 200 [mu]W of power.</Abstract>
<Access xmlns="http://purl.org/coar/access_right"
>
</Access>
</Publication>