2026-09-21T15:04:23Zhttps://dspace.mit.edu/server/oai/requestoai:dspace.mit.edu:1721.1/179302022-01-13T07:54:36Zcom_1721.1_7582com_1721.1_7581col_1721.1_131023
Alexander H. Slocum.
Abu Ibrahim, Fadi, 1980-
Massachusetts Institute of Technology. Dept. of Mechanical Engineering.
Massachusetts Institute of Technology. Department of Mechanical Engineering
2005-06-02T19:13:45Z
2005-06-02T19:13:45Z
2004
2004
http://hdl.handle.net/1721.1/17930
56803434
Thesis (S.M.)--Massachusetts Institute of Technology, Dept. of Mechanical Engineering, 2004.
Includes bibliographical references (p. 67).
This thesis guides the reader through the design of an inexpensive XY stage for abrasive water jet cutting machine starting with a set of functional requirements and ending with a product. Abrasive water jet cutting allows for mass customization of 2D parts, such as inlaid tiles. Most water jet cutters are based on a prismatic-prismatic design (gantry type). In an effort to reduce the number of precision parts in the machine, a rotary-rotary parallel drive design is proposed. The proposed mechanism will be actuated by electric DC windshield wiper motors directly coupled to the links, this eliminates the need for gearing mechanisms that add up to the total cost and complexity of the design. Kinematics of the design is simulated for a working area of 310mm x 310mm. Dynamic analysis is performed and the concepts of decoupled and configuration invariant inertia are derived, simplified to a set of conditions on the kinematic structure/mass properties of the arm linkages and applied to significantly simplify the mechanism's control system. The XY stage was designed to be inexpensive and small enough to be placed in hardware stores, garages and small machine shops. A vision of water jet cutters sold in boxes stacked on shelves in Wal-Mart, available for all machinists, artists, schools, and industries might one day thus become a reality if the pumps could also be made cheaply.
by Fadi Abu Ibrahim.
S.M.
85 p., [21] leaves of plates
4424623 bytes
4424431 bytes
application/pdf
application/pdf
eng
Massachusetts Institute of Technology
M.I.T. theses are protected by copyright. They may be viewed from this source for any purpose, but reproduction or distribution in any format is prohibited without written permission. See provided URL for inquiries about permission.
http://dspace.mit.edu/handle/1721.1/7582
Mechanical Engineering.
Designing a low cost XY stage for abrasive water jet cutting
Thesis
application/pdf
false
Publication
unknown
unknown
<Publication xmlns="https://www.openaire.eu/cerif-profile/1.1/" id="152d3f8f-6eb2-417d-a417-d27508439181">
<Type xmlns="https://www.openaire.eu/cerif-profile/vocab/COAR_Publication_Types">http://purl.org/coar/resource_type/c_1843</Type>
<Language>eng</Language>
<Title>Designing a low cost XY stage for abrasive water jet cutting</Title>
<PublishedIn>
<Publication>
</Publication>
</PublishedIn>
<PublicationDate>2004</PublicationDate>
<Authors>
<Author>
<DisplayName>Abu Ibrahim, Fadi, 1980-</DisplayName>
<Affiliation>
<OrgUnit>
</OrgUnit>
</Affiliation>
</Author>
</Authors>
<Editors>
</Editors>
<Publishers>
<Publisher>
<DisplayName>Massachusetts Institute of Technology</DisplayName>
<OrgUnit />
</Publisher>
</Publishers>
<License>http://dspace.mit.edu/handle/1721.1/7582</License>
<Keyword>Mechanical Engineering.</Keyword>
<Abstract>This thesis guides the reader through the design of an inexpensive XY stage for abrasive water jet cutting machine starting with a set of functional requirements and ending with a product. Abrasive water jet cutting allows for mass customization of 2D parts, such as inlaid tiles. Most water jet cutters are based on a prismatic-prismatic design (gantry type). In an effort to reduce the number of precision parts in the machine, a rotary-rotary parallel drive design is proposed. The proposed mechanism will be actuated by electric DC windshield wiper motors directly coupled to the links, this eliminates the need for gearing mechanisms that add up to the total cost and complexity of the design. Kinematics of the design is simulated for a working area of 310mm x 310mm. Dynamic analysis is performed and the concepts of decoupled and configuration invariant inertia are derived, simplified to a set of conditions on the kinematic structure/mass properties of the arm linkages and applied to significantly simplify the mechanism's control system. The XY stage was designed to be inexpensive and small enough to be placed in hardware stores, garages and small machine shops. A vision of water jet cutters sold in boxes stacked on shelves in Wal-Mart, available for all machinists, artists, schools, and industries might one day thus become a reality if the pumps could also be made cheaply.</Abstract>
<Access xmlns="http://purl.org/coar/access_right"
>
</Access>
</Publication>