2026-09-19T04:56:32Zhttps://dspace.mit.edu/server/oai/requestoai:dspace.mit.edu:1721.1/268792022-01-13T07:54:36Zcom_1721.1_7582com_1721.1_7581col_1721.1_131023
Alexander Slocum.
Varela, Felipe (Felipe Alonso), 1972-
Massachusetts Institute of Technology. Dept. of Mechanical Engineering.
Massachusetts Institute of Technology. Department of Mechanical Engineering
2005-09-06T20:37:39Z
2005-09-06T20:37:39Z
1999
1999
http://hdl.handle.net/1721.1/26879
45259894
Thesis (S.M.)--Massachusetts Institute of Technology, Dept. of Mechanical Engineering, 1999.
Includes bibliographical references (p. 95).
The design of a small and inexpensive abrasive waterjet cutter was carried out and documented from the specification of functional requirements through to final design and solid modeling. Starting from the identification of the functional requirements for the machine, several concepts were generated, compared and selected for further analysis. The selected concepts were then further analyzed and compared using error budgeting and cost considerations. One concept, featuring an X-Y system of motion was then selected and developed. The small working area of the machine, 13 inches by 26 inches, allowed for the X-Y concept to be developed into a design that used off-the-shelf linear guide rails as the structure of the machine. A bench-level prototype of this structure was built and tested to prove the concept and optimize the design. Once structural testing and stiffening/damping technique testing was completed, the entire machine was designed and solid modeled on Pro/ ENGINEER. The bare-rails structure resulted in a design that requires fewer precision-machined parts and fewer parts overall, resulting in a design that is inexpensive to manufacture and assemble.
bye Felipe Varela.
S.M.
98 p., [13] leaves of plates
4472953 bytes
4486421 bytes
application/pdf
application/pdf
en_US
Massachusetts Institute of Technology
M.I.T. theses are protected by copyright. They may be viewed from this source for any purpose, but reproduction or distribution in any format is prohibited without written permission. See provided URL for inquiries about permission.
http://dspace.mit.edu/handle/1721.1/7582
Mechanical Engineering.
The design of a small and inexpensive abrasive waterjet cutter
Thesis
application/pdf
Publication
unknown
unknown
<Publication xmlns="https://www.openaire.eu/cerif-profile/1.1/" id="bc5a5baf-6d9d-467f-9c25-3cfbb1f5a5b2">
<Type xmlns="https://www.openaire.eu/cerif-profile/vocab/COAR_Publication_Types">http://purl.org/coar/resource_type/c_1843</Type>
<Language>en_US</Language>
<Title>The design of a small and inexpensive abrasive waterjet cutter</Title>
<PublishedIn>
<Publication>
</Publication>
</PublishedIn>
<PublicationDate>1999</PublicationDate>
<Authors>
<Author>
<DisplayName>Varela, Felipe (Felipe Alonso), 1972-</DisplayName>
<Affiliation>
<OrgUnit>
</OrgUnit>
</Affiliation>
</Author>
</Authors>
<Editors>
</Editors>
<Publishers>
<Publisher>
<DisplayName>Massachusetts Institute of Technology</DisplayName>
<OrgUnit />
</Publisher>
</Publishers>
<License>http://dspace.mit.edu/handle/1721.1/7582</License>
<Keyword>Mechanical Engineering.</Keyword>
<Abstract>The design of a small and inexpensive abrasive waterjet cutter was carried out and documented from the specification of functional requirements through to final design and solid modeling. Starting from the identification of the functional requirements for the machine, several concepts were generated, compared and selected for further analysis. The selected concepts were then further analyzed and compared using error budgeting and cost considerations. One concept, featuring an X-Y system of motion was then selected and developed. The small working area of the machine, 13 inches by 26 inches, allowed for the X-Y concept to be developed into a design that used off-the-shelf linear guide rails as the structure of the machine. A bench-level prototype of this structure was built and tested to prove the concept and optimize the design. Once structural testing and stiffening/damping technique testing was completed, the entire machine was designed and solid modeled on Pro/ ENGINEER. The bare-rails structure resulted in a design that requires fewer precision-machined parts and fewer parts overall, resulting in a design that is inexpensive to manufacture and assemble.</Abstract>
<Access xmlns="http://purl.org/coar/access_right"
>
</Access>
</Publication>