2026-09-20T10:22:24Zhttps://dspace.mit.edu/server/oai/request

oai:dspace.mit.edu:1721.1/270752022-01-13T07:54:36Zcom_1721.1_7582com_1721.1_7581col_1721.1_131023

Simona Socrate. Kofoid, Jamie N. (Jamie Nelson), 1977- Massachusetts Institute of Technology. Dept. of Mechanical Engineering. Massachusetts Institute of Technology. Department of Mechanical Engineering 2005-09-06T21:36:59Z 2005-09-06T21:36:59Z 2004 2004 http://hdl.handle.net/1721.1/27075 56813885 Thesis (S.M.)--Massachusetts Institute of Technology, Dept. of Mechanical Engineering, 2004. Includes bibliographical references (leaves 164-169). Advanced thermoset composites are an important class of materials employed primarily in aerospace applications that consist of a thermoset polymer resin matrix that is reinforced by systematically arranged, continuous graphite fibers. Composite sheet forming, or thermoforming, is a process where flat sheets of composite layups are heated and formed into desired part shapes. Due to the complex nature of composite material response, successful composite sheet forming processes (that avoid defects such as fiber wrinkling) are traditionally the result of costly trial-and-error methods. The main objective of this research is to develop constitutive material models that can be utilized for modeling thermoset composite response during sheet forming processes. A continuum model has been developed that accounts for temperature and rate dependencies and allows solid finite element modeling that tracks material response on the microscopic level, including fiber wrinkling. The second model is a simplified, transversely isotropic elastic-plastic model that can be used together with a finite element model which employs structural (shell) elements to monitor macroscopic material response in a less computationally-intensive manner. The constitutive parameters of both models were optimized to match observed material behavior from unidirectional tensile and bending tests conducted on the composite at various temperatures and strain rates. The models were tested against a series of three-point bending verification tests that were conducted on quasi-isotropic composite layups at various rates and temperatures. Also included is an investigation of various finite element approaches that can be employed using these models to simulate (cont.) forming processes. The completed continuum model satisfactorily captures most composite behavior, with the exception of transverse shear flow behavior along the fibers. The model, developed using the assumption of isotropic flow response, requires greater refinement in order to more accurately capture composite behavior. The completed transversely isotropic elastic-plastic model satisfactorily captures all modes of composite behavior observed during experimentation. The simplified nature of this model, however, limits it from accurately describing behaviors such as fiber wrinkling during deformation. by Jamie N. Kofoid. S.M. 169 leaves 9087073 bytes 9109662 bytes application/pdf application/pdf en_US Massachusetts Institute of Technology M.I.T. theses are protected by copyright. They may be viewed from this source for any purpose, but reproduction or distribution in any format is prohibited without written permission. See provided URL for inquiries about permission. http://dspace.mit.edu/handle/1721.1/7582 Mechanical Engineering. Constitutive modeling of advanced thermoset composites with application to sheet forming processes Thesis application/pdf false Publication unknown unknown <Publication xmlns="https://www.openaire.eu/cerif-profile/1.1/" id="d95299e8-987e-45f6-8b8d-5cee449bb826"> <Type xmlns="https://www.openaire.eu/cerif-profile/vocab/COAR_Publication_Types">http://purl.org/coar/resource_type/c_1843</Type> <Language>en_US</Language> <Title>Constitutive modeling of advanced thermoset composites with application to sheet forming processes</Title> <PublishedIn> <Publication> </Publication> </PublishedIn> <PublicationDate>2004</PublicationDate> <Authors> <Author> <DisplayName>Kofoid, Jamie N. (Jamie Nelson), 1977-</DisplayName> <Affiliation> <OrgUnit> </OrgUnit> </Affiliation> </Author> </Authors> <Editors> </Editors> <Publishers> <Publisher> <DisplayName>Massachusetts Institute of Technology</DisplayName> <OrgUnit /> </Publisher> </Publishers> <License>http://dspace.mit.edu/handle/1721.1/7582</License> <Keyword>Mechanical Engineering.</Keyword> <Abstract>Advanced thermoset composites are an important class of materials employed primarily in aerospace applications that consist of a thermoset polymer resin matrix that is reinforced by systematically arranged, continuous graphite fibers. Composite sheet forming, or thermoforming, is a process where flat sheets of composite layups are heated and formed into desired part shapes. Due to the complex nature of composite material response, successful composite sheet forming processes (that avoid defects such as fiber wrinkling) are traditionally the result of costly trial-and-error methods. The main objective of this research is to develop constitutive material models that can be utilized for modeling thermoset composite response during sheet forming processes. A continuum model has been developed that accounts for temperature and rate dependencies and allows solid finite element modeling that tracks material response on the microscopic level, including fiber wrinkling. The second model is a simplified, transversely isotropic elastic-plastic model that can be used together with a finite element model which employs structural (shell) elements to monitor macroscopic material response in a less computationally-intensive manner. The constitutive parameters of both models were optimized to match observed material behavior from unidirectional tensile and bending tests conducted on the composite at various temperatures and strain rates. The models were tested against a series of three-point bending verification tests that were conducted on quasi-isotropic composite layups at various rates and temperatures. Also included is an investigation of various finite element approaches that can be employed using these models to simulate</Abstract> <Abstract>(cont.) forming processes. The completed continuum model satisfactorily captures most composite behavior, with the exception of transverse shear flow behavior along the fibers. The model, developed using the assumption of isotropic flow response, requires greater refinement in order to more accurately capture composite behavior. The completed transversely isotropic elastic-plastic model satisfactorily captures all modes of composite behavior observed during experimentation. The simplified nature of this model, however, limits it from accurately describing behaviors such as fiber wrinkling during deformation.</Abstract> <Access xmlns="http://purl.org/coar/access_right" > </Access> </Publication>