2026-09-19T21:34:59Zhttps://dspace.mit.edu/server/oai/request

oai:dspace.mit.edu:1721.1/271312022-01-13T07:54:36Zcom_1721.1_7582com_1721.1_7581col_1721.1_131023

David L. Trumper. Shilpiekandula, Vijay, 1979- Massachusetts Institute of Technology. Dept. of Mechanical Engineering. Massachusetts Institute of Technology. Department of Mechanical Engineering 2005-09-06T21:53:53Z 2005-09-06T21:53:53Z 2004 2004 http://hdl.handle.net/1721.1/27131 56844861 Thesis (S.M.)--Massachusetts Institute of Technology, Dept. of Mechanical Engineering, 2004. Includes bibliographical references (p. 129-131). This thesis presents the design and development of a novel laser-speckle-based position sensing technique. In our prototype implementation, a He-Ne laser beam is directed at the surface of an air-bearing spindle. An imaging system is set up to capture speckle patterns scattered from the spindle surface. These patterns are highly correlated over small angular displacements of the spindle. We use correlation-based image-processing algorithms to measure offsets between the speckle patterns. These offsets are calibrated against the counts of a commercial incremental optical encoder. A custom-built bicell photointerrupter unit is used as a reference sensor for the incremental optical encoder. To test for the control performance of this speckle-based sensor, we have constructed a transmission drive to run the air-bearing spindle. Our speckle-based metrology system is able to run at update rates of 10 Hz with a measured closed loop -3 dB bandwidth of about 2 Hz. Using a real-time processor interfaced with a desktop PC, we have implemented a novel algorithm that interpolates position estimates with respect to two pre-stored global images. We predict that this technique can potentially achieve resolutions of 0.1 [mu]m for translational and 5 [mu]rad for rotational motion. The limitation of our current implementation is the low update rates resulting from the time-intensive nature of correlation-based methods. Possible methods to overcome this limitation are addressed and ideas for follow-on work are presented. by Vijay Shilpiekandula. S.M. 131 p. 6572215 bytes 6588487 bytes application/pdf application/pdf en_US Massachusetts Institute of Technology M.I.T. theses are protected by copyright. They may be viewed from this source for any purpose, but reproduction or distribution in any format is prohibited without written permission. See provided URL for inquiries about permission. http://dspace.mit.edu/handle/1721.1/7582 Mechanical Engineering. A laser speckle based position sensing technique Thesis application/pdf Publication unknown unknown <Publication xmlns="https://www.openaire.eu/cerif-profile/1.1/" id="eb288e12-a57d-456c-92ca-8233ed84ed91"> <Type xmlns="https://www.openaire.eu/cerif-profile/vocab/COAR_Publication_Types">http://purl.org/coar/resource_type/c_1843</Type> <Language>en_US</Language> <Title>A laser speckle based position sensing technique</Title> <PublishedIn> <Publication> </Publication> </PublishedIn> <PublicationDate>2004</PublicationDate> <Authors> <Author> <DisplayName>Shilpiekandula, Vijay, 1979-</DisplayName> <Affiliation> <OrgUnit> </OrgUnit> </Affiliation> </Author> </Authors> <Editors> </Editors> <Publishers> <Publisher> <DisplayName>Massachusetts Institute of Technology</DisplayName> <OrgUnit /> </Publisher> </Publishers> <License>http://dspace.mit.edu/handle/1721.1/7582</License> <Keyword>Mechanical Engineering.</Keyword> <Abstract>This thesis presents the design and development of a novel laser-speckle-based position sensing technique. In our prototype implementation, a He-Ne laser beam is directed at the surface of an air-bearing spindle. An imaging system is set up to capture speckle patterns scattered from the spindle surface. These patterns are highly correlated over small angular displacements of the spindle. We use correlation-based image-processing algorithms to measure offsets between the speckle patterns. These offsets are calibrated against the counts of a commercial incremental optical encoder. A custom-built bicell photointerrupter unit is used as a reference sensor for the incremental optical encoder. To test for the control performance of this speckle-based sensor, we have constructed a transmission drive to run the air-bearing spindle. Our speckle-based metrology system is able to run at update rates of 10 Hz with a measured closed loop -3 dB bandwidth of about 2 Hz. Using a real-time processor interfaced with a desktop PC, we have implemented a novel algorithm that interpolates position estimates with respect to two pre-stored global images. We predict that this technique can potentially achieve resolutions of 0.1 [mu]m for translational and 5 [mu]rad for rotational motion. The limitation of our current implementation is the low update rates resulting from the time-intensive nature of correlation-based methods. Possible methods to overcome this limitation are addressed and ideas for follow-on work are presented.</Abstract> <Access xmlns="http://purl.org/coar/access_right" > </Access> </Publication>