2026-09-19T22:56:23Zhttps://dspace.mit.edu/server/oai/requestoai:dspace.mit.edu:1721.1/328132022-01-13T07:54:36Zcom_1721.1_7582com_1721.1_7581col_1721.1_131024
Ernesto E. Blanco.
González, Gabriel J. (Gabriel Joe), 1980-
Massachusetts Institute of Technology. Dept. of Mechanical Engineering.
Massachusetts Institute of Technology. Department of Mechanical Engineering
2006-05-15T20:32:00Z
2006-05-15T20:32:00Z
2004
2004
http://hdl.handle.net/1721.1/32813
57588603
Thesis (S.B.)--Massachusetts Institute of Technology, Dept. of Mechanical Engineering, 2004.
Includes bibliographical references.
The objective of this mechanical design project was to improve the current design of large and heavy solar concentrators. The three main design goals were: making the system compact, making the system lightweight, and minimizing expenses. The main approach to achieving these design parameters was to use the plastic film Mylar in its aluminized form to create a paraboloid serving as a solar concentrator. The scope of design was limited to designing and prototyping the solar concentrator, and neglecting to design and prototype the container in which it should be kept while in its compact form. Two designs-the tube design and the rim design-are examined, although the rim design is emphasized because of its advantages over the tube design. The tube design included a bicycle tire tube serving as the structural element of the solar concentrator, while the rim design utilized a bandsaw blade (without teeth) as the structural element of the solar concentrator. The prototype of the rim design proved to work well as a mirror, although further work, such as improving the seal around the rim, must still be done due to the time frame and resources allowed for this project.
by Gabriel J González.
S.B.
51 leaves
3832162 bytes
3832972 bytes
application/pdf
application/pdf
eng
Massachusetts Institute of Technology
M.I.T. theses are protected by copyright. They may be viewed from this source for any purpose, but reproduction or distribution in any format is prohibited without written permission. See provided URL for inquiries about permission.
http://dspace.mit.edu/handle/1721.1/7582
Mechanical Engineering.
Design of a compact, lightweight, and low-cost solar concentrator
Thesis
application/pdf
Publication
unknown
unknown
<Publication xmlns="https://www.openaire.eu/cerif-profile/1.1/" id="bb723ec9-958c-4698-93cb-65021e105220">
<Type xmlns="https://www.openaire.eu/cerif-profile/vocab/COAR_Publication_Types">http://purl.org/coar/resource_type/c_1843</Type>
<Language>eng</Language>
<Title>Design of a compact, lightweight, and low-cost solar concentrator</Title>
<PublishedIn>
<Publication>
</Publication>
</PublishedIn>
<PublicationDate>2004</PublicationDate>
<Authors>
<Author>
<DisplayName>González, Gabriel J. (Gabriel Joe), 1980-</DisplayName>
<Affiliation>
<OrgUnit>
</OrgUnit>
</Affiliation>
</Author>
</Authors>
<Editors>
</Editors>
<Publishers>
<Publisher>
<DisplayName>Massachusetts Institute of Technology</DisplayName>
<OrgUnit />
</Publisher>
</Publishers>
<License>http://dspace.mit.edu/handle/1721.1/7582</License>
<Keyword>Mechanical Engineering.</Keyword>
<Abstract>The objective of this mechanical design project was to improve the current design of large and heavy solar concentrators. The three main design goals were: making the system compact, making the system lightweight, and minimizing expenses. The main approach to achieving these design parameters was to use the plastic film Mylar in its aluminized form to create a paraboloid serving as a solar concentrator. The scope of design was limited to designing and prototyping the solar concentrator, and neglecting to design and prototype the container in which it should be kept while in its compact form. Two designs-the tube design and the rim design-are examined, although the rim design is emphasized because of its advantages over the tube design. The tube design included a bicycle tire tube serving as the structural element of the solar concentrator, while the rim design utilized a bandsaw blade (without teeth) as the structural element of the solar concentrator. The prototype of the rim design proved to work well as a mirror, although further work, such as improving the seal around the rim, must still be done due to the time frame and resources allowed for this project.</Abstract>
<Access xmlns="http://purl.org/coar/access_right"
>
</Access>
</Publication>