2026-09-23T08:22:42Zhttps://dspace.mit.edu/server/oai/requestoai:dspace.mit.edu:1721.1/329232022-01-13T07:54:36Zcom_1721.1_7582com_1721.1_7581col_1721.1_131024
David Gossard.
Stach, Laurie A. (Laurie Anna)
Massachusetts Institute of Technology. Dept. of Mechanical Engineering.
Massachusetts Institute of Technology. Department of Mechanical Engineering
2006-05-15T20:39:34Z
2006-05-15T20:39:34Z
2005
2005
http://hdl.handle.net/1721.1/32923
62764268
Thesis (S.B.)--Massachusetts Institute of Technology, Dept. of Mechanical Engineering, 2005.
Includes bibliographical references (leaf 48).
A model of an icosahedral virus was designed and manufactured. Much consideration was given to the design of different aspects of the part. though there were many uncertainties about some parameters that disallowed precise prediction of part outcomes. The part was designed in SolidWorks and Mastercam, and converted to a tool path that allowed machining of the mold on the CNC milling machine. This mold was then taken to the injection molding machine where multiples of the part could be produced. The mold had to be redesigned several times to incorporate solutions to problems that arose along the way due to the uncertainties inherent from the beginning. New parts were produced upon each revision and tested. Finally, both the core and cavity molds were redesigned and rebuilt. These new molds produced parts that fit together properly and provided an accurate model of the icosahedral virus. A majority of the knowledge obtained from this project arose from the uncertainties and their corresponding problems and solutions. Making mistakes allowed the potential for creativity with designing a solution. The two objectives of the project were achieved; a three-dimensional virus model for educational use in the biology classroom was built and knowledge about the design and manufacturing process was obtained and documented.
by Laurie A. Stach.
S.B.
49 leaves
2936189 bytes
2936826 bytes
application/pdf
application/pdf
eng
Massachusetts Institute of Technology
M.I.T. theses are protected by copyright. They may be viewed from this source for any purpose, but reproduction or distribution in any format is prohibited without written permission. See provided URL for inquiries about permission.
http://dspace.mit.edu/handle/1721.1/7582
Mechanical Engineering.
Design and manufacture of an icosahedral virus model for educational use
Thesis
application/pdf
false
Publication
unknown
unknown
<Publication xmlns="https://www.openaire.eu/cerif-profile/1.1/" id="0da8d77f-806e-492e-b32e-a6aac8965b86">
<Type xmlns="https://www.openaire.eu/cerif-profile/vocab/COAR_Publication_Types">http://purl.org/coar/resource_type/c_1843</Type>
<Language>eng</Language>
<Title>Design and manufacture of an icosahedral virus model for educational use</Title>
<PublishedIn>
<Publication>
</Publication>
</PublishedIn>
<PublicationDate>2005</PublicationDate>
<Authors>
<Author>
<DisplayName>Stach, Laurie A. (Laurie Anna)</DisplayName>
<Affiliation>
<OrgUnit>
</OrgUnit>
</Affiliation>
</Author>
</Authors>
<Editors>
</Editors>
<Publishers>
<Publisher>
<DisplayName>Massachusetts Institute of Technology</DisplayName>
<OrgUnit />
</Publisher>
</Publishers>
<License>http://dspace.mit.edu/handle/1721.1/7582</License>
<Keyword>Mechanical Engineering.</Keyword>
<Abstract>A model of an icosahedral virus was designed and manufactured. Much consideration was given to the design of different aspects of the part. though there were many uncertainties about some parameters that disallowed precise prediction of part outcomes. The part was designed in SolidWorks and Mastercam, and converted to a tool path that allowed machining of the mold on the CNC milling machine. This mold was then taken to the injection molding machine where multiples of the part could be produced. The mold had to be redesigned several times to incorporate solutions to problems that arose along the way due to the uncertainties inherent from the beginning. New parts were produced upon each revision and tested. Finally, both the core and cavity molds were redesigned and rebuilt. These new molds produced parts that fit together properly and provided an accurate model of the icosahedral virus. A majority of the knowledge obtained from this project arose from the uncertainties and their corresponding problems and solutions. Making mistakes allowed the potential for creativity with designing a solution. The two objectives of the project were achieved; a three-dimensional virus model for educational use in the biology classroom was built and knowledge about the design and manufacturing process was obtained and documented.</Abstract>
<Access xmlns="http://purl.org/coar/access_right"
>
</Access>
</Publication>