2026-09-20T14:29:15Zhttps://dspace.mit.edu/server/oai/request

oai:dspace.mit.edu:1721.1/329582022-01-13T07:54:36Zcom_1721.1_7582com_1721.1_7581col_1721.1_131024

Ernest G. Cravalho. Padilla, Jorge, 1983- Massachusetts Institute of Technology. Dept. of Mechanical Engineering. Massachusetts Institute of Technology. Department of Mechanical Engineering 2006-05-15T20:41:56Z 2006-05-15T20:41:56Z 2005 2005 http://hdl.handle.net/1721.1/32958 62859647 Thesis (S.B.)--Massachusetts Institute of Technology, Dept. of Mechanical Engineering, 2005. Includes bibliographical references (leaf 50). Thermal-Fluids Engineering is taught in two semesters in the Department of Mechanical Engineering at the Massachusetts Institute of Technology. To emphasize the course material, running experiments of thermodynamic plants are integrated into the course as demonstrations. The aim of this thesis is to supplement the course demonstrations of thermodynamic plants through the design and fabrication of a gas-turbine engine. The engine operates on an open version of the Brayton cycle. Students will be able to evaluate the energy conversion efficiency and net work ratio from air temperature measurements in three stages of the cycle. The gas-turbine engine is made from an automobile turbocharger for its common shaft turbine and compressor. A combustion chamber was placed between the outlet of the compressor and the inlet of the turbine. The temperature measurement system was designed from the placement of thermocouples on the outside wall of a pipe leading from the compressor to the combustor, on the outside wall of a pipe leading from the combustor to the turbine, and on the outside wall of the turbine exhaust pipe. As the temperature measured by the thermocouple will be that of the outside walls of the engine, the model will depict the cross-sectional temperature profile so the students will know the actual bulk temperature of the working fluid, air. by Jorge Padilla, Jr. S.B. 63 leaves 2911971 bytes 2913755 bytes application/pdf application/pdf eng Massachusetts Institute of Technology M.I.T. theses are protected by copyright. They may be viewed from this source for any purpose, but reproduction or distribution in any format is prohibited without written permission. See provided URL for inquiries about permission. http://dspace.mit.edu/handle/1721.1/7582 Mechanical Engineering. Design, fabrication, and performance of a gas-turbine engine from an automobile turbocharger Thesis application/pdf false Publication unknown unknown <Publication xmlns="https://www.openaire.eu/cerif-profile/1.1/" id="98fa78ff-a57a-4454-94d7-6dab5fc2e59b"> <Type xmlns="https://www.openaire.eu/cerif-profile/vocab/COAR_Publication_Types">http://purl.org/coar/resource_type/c_1843</Type> <Language>eng</Language> <Title>Design, fabrication, and performance of a gas-turbine engine from an automobile turbocharger</Title> <PublishedIn> <Publication> </Publication> </PublishedIn> <PublicationDate>2005</PublicationDate> <Authors> <Author> <DisplayName>Padilla, Jorge, 1983-</DisplayName> <Affiliation> <OrgUnit> </OrgUnit> </Affiliation> </Author> </Authors> <Editors> </Editors> <Publishers> <Publisher> <DisplayName>Massachusetts Institute of Technology</DisplayName> <OrgUnit /> </Publisher> </Publishers> <License>http://dspace.mit.edu/handle/1721.1/7582</License> <Keyword>Mechanical Engineering.</Keyword> <Abstract>Thermal-Fluids Engineering is taught in two semesters in the Department of Mechanical Engineering at the Massachusetts Institute of Technology. To emphasize the course material, running experiments of thermodynamic plants are integrated into the course as demonstrations. The aim of this thesis is to supplement the course demonstrations of thermodynamic plants through the design and fabrication of a gas-turbine engine. The engine operates on an open version of the Brayton cycle. Students will be able to evaluate the energy conversion efficiency and net work ratio from air temperature measurements in three stages of the cycle. The gas-turbine engine is made from an automobile turbocharger for its common shaft turbine and compressor. A combustion chamber was placed between the outlet of the compressor and the inlet of the turbine. The temperature measurement system was designed from the placement of thermocouples on the outside wall of a pipe leading from the compressor to the combustor, on the outside wall of a pipe leading from the combustor to the turbine, and on the outside wall of the turbine exhaust pipe. As the temperature measured by the thermocouple will be that of the outside walls of the engine, the model will depict the cross-sectional temperature profile so the students will know the actual bulk temperature of the working fluid, air.</Abstract> <Access xmlns="http://purl.org/coar/access_right" > </Access> </Publication>