2026-09-19T21:11:34Zhttps://dspace.mit.edu/server/oai/requestoai:dspace.mit.edu:1721.1/350722022-01-13T07:54:33Zcom_1721.1_7582com_1721.1_7581col_1721.1_131024
Donald R. Sadoway.
Cooper, Benjamin D
Massachusetts Institute of Technology. Dept. of Materials Science and Engineering.
Massachusetts Institute of Technology. Department of Materials Science and Engineering
2006-12-18T20:02:17Z
2006-12-18T20:02:17Z
2006
http://hdl.handle.net/1721.1/35072
71231057
Thesis (S.B.)--Massachusetts Institute of Technology, Dept. of Materials Science and Engineering, June 2006.
"May 2006."
Includes bibliographical references (leaves 35-36).
Carbon, tungsten, platinum, and iridium were examined as candidate anode materials for an electrolytic cell. The materials were pre-selected to endure high process temperatures and were characterized for inertness and high current density during electrolysis using voltammometric techniques. Inertness is viewable through current discrepancies dependent on voltage scan direction at low voltage, consumption of current by metal oxide formation, and ease of surface oxide electro-stripping. Conductivity during electrolytic oxidation is observable as current density maximization at high voltages. While carbon, tungsten, and platinum formed surface oxides, iridium remained quite inert. In addition, the voltage hold-time was found to affect the leading current density, as platinum performed best during cyclic voltammometry, but iridium performed best during potentiostatic electrolysis. The intermediate potentiodynamic scan-rate displays the transition from platinum to iridium dominated current density.
by Benjamin D. Cooper.
S.B.
36 leaves
1687097 bytes
1686436 bytes
application/pdf
application/pdf
eng
Massachusetts Institute of Technology
M.I.T. theses are protected by copyright. They may be viewed from this source for any purpose, but reproduction or distribution in any format is prohibited without written permission. See provided URL for inquiries about permission.
http://dspace.mit.edu/handle/1721.1/7582
Materials Science and Engineering.
Electrode materials for the electrolysis of metal oxides
Thesis
application/pdf
Publication
unknown
unknown
<Publication xmlns="https://www.openaire.eu/cerif-profile/1.1/" id="968c88c4-a47e-4674-ad1a-3d3fdb9f094e">
<Type xmlns="https://www.openaire.eu/cerif-profile/vocab/COAR_Publication_Types">http://purl.org/coar/resource_type/c_1843</Type>
<Language>eng</Language>
<Title>Electrode materials for the electrolysis of metal oxides</Title>
<PublishedIn>
<Publication>
</Publication>
</PublishedIn>
<PublicationDate>2006</PublicationDate>
<Authors>
<Author>
<DisplayName>Cooper, Benjamin D</DisplayName>
<Affiliation>
<OrgUnit>
</OrgUnit>
</Affiliation>
</Author>
</Authors>
<Editors>
</Editors>
<Publishers>
<Publisher>
<DisplayName>Massachusetts Institute of Technology</DisplayName>
<OrgUnit />
</Publisher>
</Publishers>
<License>http://dspace.mit.edu/handle/1721.1/7582</License>
<Keyword>Materials Science and Engineering.</Keyword>
<Abstract>Carbon, tungsten, platinum, and iridium were examined as candidate anode materials for an electrolytic cell. The materials were pre-selected to endure high process temperatures and were characterized for inertness and high current density during electrolysis using voltammometric techniques. Inertness is viewable through current discrepancies dependent on voltage scan direction at low voltage, consumption of current by metal oxide formation, and ease of surface oxide electro-stripping. Conductivity during electrolytic oxidation is observable as current density maximization at high voltages. While carbon, tungsten, and platinum formed surface oxides, iridium remained quite inert. In addition, the voltage hold-time was found to affect the leading current density, as platinum performed best during cyclic voltammometry, but iridium performed best during potentiostatic electrolysis. The intermediate potentiodynamic scan-rate displays the transition from platinum to iridium dominated current density.</Abstract>
<Access xmlns="http://purl.org/coar/access_right"
>
</Access>
</Publication>