2026-09-19T03:23:45Zhttps://dspace.mit.edu/server/oai/requestoai:dspace.mit.edu:1721.1/366992022-01-13T07:54:36Zcom_1721.1_7582com_1721.1_7581col_1721.1_131024
David Gordon Wilson.
Socks, Matthew T. (Matthew Tristram)
Massachusetts Institute of Technology. Dept. of Mechanical Engineering.
Massachusetts Institute of Technology. Department of Mechanical Engineering
2007-03-12T17:45:34Z
2007-03-12T17:45:34Z
2006
2006
http://hdl.handle.net/1721.1/36699
77549265
Thesis (S.B.)--Massachusetts Institute of Technology, Dept. of Mechanical Engineering, 2006.
Includes bibliographical references (leaf 24).
Hydrostatic bicycle drives use a working fluid instead of the common roller-chain to transmit power to the drive wheel. These transmissions are typically considered too inefficient for human power applications. An experiment consisting of a very simple hydrostatic drive was designed and built in an attempt to measure the efficiency of these devices at approximate cycling speeds. A theoretical model was also developed to help predict losses using a wider range of operational parameters. Due to shortcomings of the experiment design, the measured efficiencies were on the order of 60% - considerably lower than those theoretically possible. Although the experimental results are of limited value, this study highlights the importance of minimizing side-loading on hydraulic cylinder piston-rods during low-speed, low-pressure operation. The research is used to suggest several design features which may aid in continued attempts to develop a highly efficient hydrostatic transmission.
by Michael T. Socks
S.B.
31 leaves
eng
Massachusetts Institute of Technology
M.I.T. theses are protected by copyright. They may be viewed from this source for any purpose, but reproduction or distribution in any format is prohibited without written permission. See provided URL for inquiries about permission.
http://dspace.mit.edu/handle/1721.1/7582
Mechanical Engineering.
Designing a high-efficiency hydrostatic bicycle transmission
Thesis
application/pdf
Publication
unknown
unknown
<Publication xmlns="https://www.openaire.eu/cerif-profile/1.1/" id="309deb8b-580c-4b3c-b467-3024e11662e9">
<Type xmlns="https://www.openaire.eu/cerif-profile/vocab/COAR_Publication_Types">http://purl.org/coar/resource_type/c_1843</Type>
<Language>eng</Language>
<Title>Designing a high-efficiency hydrostatic bicycle transmission</Title>
<PublishedIn>
<Publication>
</Publication>
</PublishedIn>
<PublicationDate>2006</PublicationDate>
<Authors>
<Author>
<DisplayName>Socks, Matthew T. (Matthew Tristram)</DisplayName>
<Affiliation>
<OrgUnit>
</OrgUnit>
</Affiliation>
</Author>
</Authors>
<Editors>
</Editors>
<Publishers>
<Publisher>
<DisplayName>Massachusetts Institute of Technology</DisplayName>
<OrgUnit />
</Publisher>
</Publishers>
<License>http://dspace.mit.edu/handle/1721.1/7582</License>
<Keyword>Mechanical Engineering.</Keyword>
<Abstract>Hydrostatic bicycle drives use a working fluid instead of the common roller-chain to transmit power to the drive wheel. These transmissions are typically considered too inefficient for human power applications. An experiment consisting of a very simple hydrostatic drive was designed and built in an attempt to measure the efficiency of these devices at approximate cycling speeds. A theoretical model was also developed to help predict losses using a wider range of operational parameters. Due to shortcomings of the experiment design, the measured efficiencies were on the order of 60% - considerably lower than those theoretically possible. Although the experimental results are of limited value, this study highlights the importance of minimizing side-loading on hydraulic cylinder piston-rods during low-speed, low-pressure operation. The research is used to suggest several design features which may aid in continued attempts to develop a highly efficient hydrostatic transmission.</Abstract>
<Access xmlns="http://purl.org/coar/access_right"
>
</Access>
</Publication>