2026-09-19T14:39:56Zhttps://dspace.mit.edu/server/oai/requestoai:dspace.mit.edu:1721.1/392612022-01-13T07:54:36Zcom_1721.1_7582com_1721.1_7581col_1721.1_131023
David Gordon Wilson.
Akinwale, P. Femi (Pamela Femi)
Massachusetts Institute of Technology. Dept. of Mechanical Engineering.
Massachusetts Institute of Technology. Department of Mechanical Engineering
2007-10-22T16:32:13Z
2007-10-22T16:32:13Z
2006
2006
http://hdl.handle.net/1721.1/39261
173660389
Thesis (S.M.)--Massachusetts Institute of Technology, Dept. of Mechanical Engineering, 2006.
This electronic version was submitted by the student author. The certified thesis is available in the Institute Archives and Special Collections.
Includes bibliographical references (p. 63-64).
One reason that solar cookers have not gained widespread acceptance is because their use has proved inconvenient and impractical. Users are restricted to cooking when, and where, the sun is shining. Furthermore, the cooking temperature can not readily be raised or lowered as desired. In contrast, the Wilson solar cooker is designed to permit use under conditions characterized by low or no insulation. Furthermore, the design would facilitate users adjusting temperatures. These temperatures would reach levels as high as 258° C. In order to validate the concept, construction of one prototype was initiated. Lithium nitrate, the heat-storage material, was shown to meet the stated requirements of storing heat at a constant temperature of 258° C for up to six hours. Furthermore, this heat-storage material stored heat at temperatures above the boiling point of water, for up to 25 hours. Thus, it is expected that a meal for six people can be prepared up to six hours after charging of the thermal battery.
by P. Femi Akinwale.
S.M.
64 p.
eng
Massachusetts Institute of Technology
M.I.T. theses are protected by copyright. They may be viewed from this source for any purpose, but reproduction or distribution in any format is prohibited without written permission. See provided URL for inquiries about permission.
http://dspace.mit.edu/handle/1721.1/7582
Mechanical Engineering.
Development of an asynchronous solar-powered cooker
Thesis
application/pdf
false
Publication
unknown
unknown
<Publication xmlns="https://www.openaire.eu/cerif-profile/1.1/" id="72ffb1ab-197d-4f8e-84b2-1aa77c992318">
<Type xmlns="https://www.openaire.eu/cerif-profile/vocab/COAR_Publication_Types">http://purl.org/coar/resource_type/c_1843</Type>
<Language>eng</Language>
<Title>Development of an asynchronous solar-powered cooker</Title>
<PublishedIn>
<Publication>
</Publication>
</PublishedIn>
<PublicationDate>2006</PublicationDate>
<Authors>
<Author>
<DisplayName>Akinwale, P. Femi (Pamela Femi)</DisplayName>
<Affiliation>
<OrgUnit>
</OrgUnit>
</Affiliation>
</Author>
</Authors>
<Editors>
</Editors>
<Publishers>
<Publisher>
<DisplayName>Massachusetts Institute of Technology</DisplayName>
<OrgUnit />
</Publisher>
</Publishers>
<License>http://dspace.mit.edu/handle/1721.1/7582</License>
<Keyword>Mechanical Engineering.</Keyword>
<Abstract>One reason that solar cookers have not gained widespread acceptance is because their use has proved inconvenient and impractical. Users are restricted to cooking when, and where, the sun is shining. Furthermore, the cooking temperature can not readily be raised or lowered as desired. In contrast, the Wilson solar cooker is designed to permit use under conditions characterized by low or no insulation. Furthermore, the design would facilitate users adjusting temperatures. These temperatures would reach levels as high as 258° C. In order to validate the concept, construction of one prototype was initiated. Lithium nitrate, the heat-storage material, was shown to meet the stated requirements of storing heat at a constant temperature of 258° C for up to six hours. Furthermore, this heat-storage material stored heat at temperatures above the boiling point of water, for up to 25 hours. Thus, it is expected that a meal for six people can be prepared up to six hours after charging of the thermal battery.</Abstract>
<Access xmlns="http://purl.org/coar/access_right"
>
</Access>
</Publication>