2026-09-20T07:00:56Zhttps://dspace.mit.edu/server/oai/requestoai:dspace.mit.edu:1721.1/404152022-01-13T07:54:36Zcom_1721.1_7582com_1721.1_7581col_1721.1_131024
Steve G. Massaquoi.
Chan, Nathaniel K. (Nathaniel Kai Yip)
Massachusetts Institute of Technology. Dept. of Mechanical Engineering.
Massachusetts Institute of Technology. Department of Mechanical Engineering
2008-02-27T22:22:52Z
2008-02-27T22:22:52Z
2007
2007
http://hdl.handle.net/1721.1/40415
191698549
Thesis (S.B.)--Massachusetts Institute of Technology, Dept. of Mechanical Engineering, 2007.
Includes bibliographical references (leaf 21).
Fluid, efficient, robust bipedal locomotion is hard by some approaches. Today's most advanced bipedal robots require flat and level floors, but are still prone to trips and falls. They have trouble interacting with objects in their surroundings, and adapting to them. We think that new approaches may make bipedal control easier. The following work details the design of the BOB (Bag of Bones) biomorphic robot leg that is a continuation of an effort to achieve a better understanding of the sensorimotor neurocontrol of locomotion, particularly in humans. Such an understanding will not only lead to robots that move as well or better than people while being easier to control, but will also enable powerful therapies for ataxia patients. One of the main design requirements for BOB was to incorporate series elastic actuation, but with hobby servo motors as the power source. The use of hobby servos was intended to keep costs low, as was the extensive use of off the shelf parts whenever possible. With the recent advances in hobby servo motors, it was expected that reasonable if not high performance would be possible. The specific contribution of this work includes the entire series elastic actuation system powered by servo motors.
(Cont.) The elements of the actuation system include circular servo horns, wire rope used in loops, turnbuckles, and series elastic elements that use compression springs in extension. It was found that the knee joint can flex from 0 to 90 degrees and back in about 0.7 seconds. Similarly, the ankle cycled from approximately 20 degrees of extension to approximately 35 degrees of flexion in about 0.7 seconds. These performance figures indicate that the gearing ratios at the knee and ankle are appropriate and that the current design is sufficiently powered for walking.
by Nathaniel K. Chan.
S.B.
21 leaves
eng
Massachusetts Institute of Technology
M.I.T. theses are protected by copyright. They may be viewed from this source for any purpose, but reproduction or distribution in any format is prohibited without written permission. See provided URL for inquiries about permission.
http://dspace.mit.edu/handle/1721.1/7582
Mechanical Engineering.
Design and implementation of series elastic actuation in a biomorphic robot leg
Thesis
application/pdf
Publication
unknown
unknown
<Publication xmlns="https://www.openaire.eu/cerif-profile/1.1/" id="eeb6afdc-80bf-4ecf-a517-1e767257c9ca">
<Type xmlns="https://www.openaire.eu/cerif-profile/vocab/COAR_Publication_Types">http://purl.org/coar/resource_type/c_1843</Type>
<Language>eng</Language>
<Title>Design and implementation of series elastic actuation in a biomorphic robot leg</Title>
<PublishedIn>
<Publication>
</Publication>
</PublishedIn>
<PublicationDate>2007</PublicationDate>
<Authors>
<Author>
<DisplayName>Chan, Nathaniel K. (Nathaniel Kai Yip)</DisplayName>
<Affiliation>
<OrgUnit>
</OrgUnit>
</Affiliation>
</Author>
</Authors>
<Editors>
</Editors>
<Publishers>
<Publisher>
<DisplayName>Massachusetts Institute of Technology</DisplayName>
<OrgUnit />
</Publisher>
</Publishers>
<License>http://dspace.mit.edu/handle/1721.1/7582</License>
<Keyword>Mechanical Engineering.</Keyword>
<Abstract>Fluid, efficient, robust bipedal locomotion is hard by some approaches. Today's most advanced bipedal robots require flat and level floors, but are still prone to trips and falls. They have trouble interacting with objects in their surroundings, and adapting to them. We think that new approaches may make bipedal control easier. The following work details the design of the BOB (Bag of Bones) biomorphic robot leg that is a continuation of an effort to achieve a better understanding of the sensorimotor neurocontrol of locomotion, particularly in humans. Such an understanding will not only lead to robots that move as well or better than people while being easier to control, but will also enable powerful therapies for ataxia patients. One of the main design requirements for BOB was to incorporate series elastic actuation, but with hobby servo motors as the power source. The use of hobby servos was intended to keep costs low, as was the extensive use of off the shelf parts whenever possible. With the recent advances in hobby servo motors, it was expected that reasonable if not high performance would be possible. The specific contribution of this work includes the entire series elastic actuation system powered by servo motors.</Abstract>
<Abstract>(Cont.) The elements of the actuation system include circular servo horns, wire rope used in loops, turnbuckles, and series elastic elements that use compression springs in extension. It was found that the knee joint can flex from 0 to 90 degrees and back in about 0.7 seconds. Similarly, the ankle cycled from approximately 20 degrees of extension to approximately 35 degrees of flexion in about 0.7 seconds. These performance figures indicate that the gearing ratios at the knee and ankle are appropriate and that the current design is sufficiently powered for walking.</Abstract>
<Access xmlns="http://purl.org/coar/access_right"
>
</Access>
</Publication>