2026-09-19T09:07:40Zhttps://dspace.mit.edu/server/oai/requestoai:dspace.mit.edu:1721.1/443792022-01-13T07:54:29Zcom_1721.1_7582com_1721.1_7581col_1721.1_131023
Joel L. Dawson.
Godoy, Philip (Philip Andrew)
Massachusetts Institute of Technology. Dept. of Electrical Engineering and Computer Science.
Massachusetts Institute of Technology. Department of Electrical Engineering and Computer Science
2009-01-30T16:39:19Z
2009-01-30T16:39:19Z
2008
2008
http://hdl.handle.net/1721.1/44379
276949002
Thesis (S.M.)--Massachusetts Institute of Technology, Dept. of Electrical Engineering and Computer Science, 2008.
Includes bibliographical references (p. 97-99).
We describe a general offset-cancelling architecture for analog multiplication using chopper stabilization. Chopping is used to modulate the offset away the output signal where it can be easily filtered out, providing continuous offset reduction which is insensitive to drift. Both square wave chopping and chopping with orthogonal spreading codes are tested and shown to reduce the offset down to the microvolt level. In addition, we apply the nested chopping technique to an analog multiplier which employs two levels of chopping to reduce the offset even further. We discuss the limits on the performance of the various chopping methods in detail, and present a detailed analysis of the residual offset due to charge injection spikes. An illustrative CMOS prototype of a chopper-stabilized general-purpose multiplier in a 0.18/pm process is presented which achieves a worst-case offset of 1.5/tV. This is the lowest measured offset reported in the DC analog multiplier literature by a margin of two orders of magnitude. The prototype multiplier is also tested with AC inputs as a squarer, variable gain amplifier, and direct-conversion mixer, demonstrating that chopper stabilization is effective for both DC and AC multiplication. The AC measurements show that chopping removes not only offset, but also 1/f noise and 2nd-order harmonic distortion. The specific application of chopper stabilization to RF direct-conversion mixers is also discussed in detail, showing how it can be used to improve the sensitivity of direct-conversion receivers by reducing the mixer's offset, 1/f noise, and even-order distortion. A prototype IC of a chopper-stabilized RF mixer in a 0.18pm CMOS process is presented, along with measured results.
by Philip Godoy.
S.M.
99 p.
eng
Massachusetts Institute of Technology
M.I.T. theses are protected by
copyright. They may be viewed from this source for any purpose, but
reproduction or distribution in any format is prohibited without written
permission. See provided URL for inquiries about permission.
http://dspace.mit.edu/handle/1721.1/7582
Electrical Engineering and Computer Science.
Nested chopper stabilization in analog multipliers and mixers
Thesis
application/pdf
false
Publication
unknown
unknown
<Publication xmlns="https://www.openaire.eu/cerif-profile/1.1/" id="f3827380-c01d-440d-bcca-ec3fb7c8c98e">
<Type xmlns="https://www.openaire.eu/cerif-profile/vocab/COAR_Publication_Types">http://purl.org/coar/resource_type/c_1843</Type>
<Language>eng</Language>
<Title>Nested chopper stabilization in analog multipliers and mixers</Title>
<PublishedIn>
<Publication>
</Publication>
</PublishedIn>
<PublicationDate>2008</PublicationDate>
<Authors>
<Author>
<DisplayName>Godoy, Philip (Philip Andrew)</DisplayName>
<Affiliation>
<OrgUnit>
</OrgUnit>
</Affiliation>
</Author>
</Authors>
<Editors>
</Editors>
<Publishers>
<Publisher>
<DisplayName>Massachusetts Institute of Technology</DisplayName>
<OrgUnit />
</Publisher>
</Publishers>
<License>http://dspace.mit.edu/handle/1721.1/7582</License>
<Keyword>Electrical Engineering and Computer Science.</Keyword>
<Abstract>We describe a general offset-cancelling architecture for analog multiplication using chopper stabilization. Chopping is used to modulate the offset away the output signal where it can be easily filtered out, providing continuous offset reduction which is insensitive to drift. Both square wave chopping and chopping with orthogonal spreading codes are tested and shown to reduce the offset down to the microvolt level. In addition, we apply the nested chopping technique to an analog multiplier which employs two levels of chopping to reduce the offset even further. We discuss the limits on the performance of the various chopping methods in detail, and present a detailed analysis of the residual offset due to charge injection spikes. An illustrative CMOS prototype of a chopper-stabilized general-purpose multiplier in a 0.18/pm process is presented which achieves a worst-case offset of 1.5/tV. This is the lowest measured offset reported in the DC analog multiplier literature by a margin of two orders of magnitude. The prototype multiplier is also tested with AC inputs as a squarer, variable gain amplifier, and direct-conversion mixer, demonstrating that chopper stabilization is effective for both DC and AC multiplication. The AC measurements show that chopping removes not only offset, but also 1/f noise and 2nd-order harmonic distortion. The specific application of chopper stabilization to RF direct-conversion mixers is also discussed in detail, showing how it can be used to improve the sensitivity of direct-conversion receivers by reducing the mixer's offset, 1/f noise, and even-order distortion. A prototype IC of a chopper-stabilized RF mixer in a 0.18pm CMOS process is presented, along with measured results.</Abstract>
<Access xmlns="http://purl.org/coar/access_right"
>
</Access>
</Publication>