2026-09-19T23:11:24Zhttps://dspace.mit.edu/server/oai/requestoai:dspace.mit.edu:1721.1/461242022-01-13T07:54:29Zcom_1721.1_7582com_1721.1_7581col_1721.1_131023
Cardinal Warde.
Guerra, Marvin J
Massachusetts Institute of Technology. Dept. of Electrical Engineering and Computer Science.
Massachusetts Institute of Technology. Department of Electrical Engineering and Computer Science
2009-06-30T17:22:22Z
2009-06-30T17:22:22Z
2008
2008
http://hdl.handle.net/1721.1/46124
391963786
Thesis (M. Eng.)--Massachusetts Institute of Technology, Dept. of Electrical Engineering and Computer Science, 2008.
Includes bibliographical references (leaves 47-48).
An experimental study was carried out on the ability to create a three-dimensional holographic movie. Holograms were written on VRP-M emulsion film with the green line of an Argon-Ion laser. The type of hologram write setup favored was a reflection hologram, due to its artistic capabilities. The illusion of a floating image is much better produced by reflection holograms as opposed to transmission holograms. However, due to the thinness of the film, white light readout was not possible, and the reading setup included the original writing laser. Although successful holograms were written on sheets with same emulsion as the final roll film, the final product on the roll of film did not result as expected due to a failure in the development process. This paper will describe the setup that I created, discuss the aspects of the process that turned out well and suggest improvements to achieve a successful experiment in the future.
by Marvin J. Guerra.
M.Eng.
55 leaves
eng
Massachusetts Institute of Technology
M.I.T. theses are protected by
copyright. They may be viewed from this source for any purpose, but
reproduction or distribution in any format is prohibited without written
permission. See provided URL for inquiries about permission.
http://dspace.mit.edu/handle/1721.1/7582
Electrical Engineering and Computer Science.
Creating a three dimensional holographic movie
Creating a 3D holographic movie
Thesis
application/pdf
false
Publication
unknown
unknown
<Publication xmlns="https://www.openaire.eu/cerif-profile/1.1/" id="599fd8f2-fb82-4119-a26f-ac14e75f7189">
<Type xmlns="https://www.openaire.eu/cerif-profile/vocab/COAR_Publication_Types">http://purl.org/coar/resource_type/c_1843</Type>
<Language>eng</Language>
<Title>Creating a three dimensional holographic movie</Title>
<Subtitle>Creating a 3D holographic movie</Subtitle>
<PublishedIn>
<Publication>
</Publication>
</PublishedIn>
<PublicationDate>2008</PublicationDate>
<Authors>
<Author>
<DisplayName>Guerra, Marvin J</DisplayName>
<Affiliation>
<OrgUnit>
</OrgUnit>
</Affiliation>
</Author>
</Authors>
<Editors>
</Editors>
<Publishers>
<Publisher>
<DisplayName>Massachusetts Institute of Technology</DisplayName>
<OrgUnit />
</Publisher>
</Publishers>
<License>http://dspace.mit.edu/handle/1721.1/7582</License>
<Keyword>Electrical Engineering and Computer Science.</Keyword>
<Abstract>An experimental study was carried out on the ability to create a three-dimensional holographic movie. Holograms were written on VRP-M emulsion film with the green line of an Argon-Ion laser. The type of hologram write setup favored was a reflection hologram, due to its artistic capabilities. The illusion of a floating image is much better produced by reflection holograms as opposed to transmission holograms. However, due to the thinness of the film, white light readout was not possible, and the reading setup included the original writing laser. Although successful holograms were written on sheets with same emulsion as the final roll film, the final product on the roll of film did not result as expected due to a failure in the development process. This paper will describe the setup that I created, discuss the aspects of the process that turned out well and suggest improvements to achieve a successful experiment in the future.</Abstract>
<Access xmlns="http://purl.org/coar/access_right"
>
</Access>
</Publication>