2026-09-20T01:18:38Zhttps://dspace.mit.edu/server/oai/requestoai:dspace.mit.edu:1721.1/505652022-01-13T07:54:36Zcom_1721.1_7582com_1721.1_7581col_1721.1_131023
David E. Hardt.
Hale, Melinda (Melinda Rae)
Massachusetts Institute of Technology. Dept. of Mechanical Engineering.
Massachusetts Institute of Technology. Department of Mechanical Engineering
2010-01-07T20:54:00Z
2010-01-07T20:54:00Z
2009
2009
http://hdl.handle.net/1721.1/50565
463643198
Thesis (S.M.)--Massachusetts Institute of Technology, Dept. of Mechanical Engineering, 2009.
Includes bibliographical references (leaves 135-137).
Hot embossing is an effective technology for reproducing micro-scale features in polymeric materials, but large-scale adoption of this method is hindered by high capital costs and low cycle times relative to other technologies, and a general lack of manufacturing equipment. This work details a hot embossing machine design strategy motivated by maximum production speed and quality with minimal capital cost. The approach is to "right-size" the machine for specific product needs while making the design flexible and scalable. Toward this end, a minimal number of components were used, commercially available off-the-shelf components were chosen where possible, system layout was designed to be modular, and system size was scaled for the intended products (in this case microfluidic devices). Innovative design aspects include the use of new ceramic substrate heaters for electrical heating, use of a moveable heat sink to minimize heat load during the heating cycle, and the careful design of the thermal elements to minimize the heating and cooling cycle times. The capital cost and the cost per part produced with this machine are estimated to be an order of magnitude less than currently available hot embossing manufacturing options. The hot embossing machine has been tested extensively to characterize the process variability. The minimum cycle time is two minutes, and microstructures are replicated within a maximum of a 25mm by 75mm area with very low relative variance in dimensions.
by Melinda Hale.
S.M.
137 leaves
eng
Massachusetts Institute of Technology
M.I.T. theses are protected by
copyright. They may be viewed from this source for any purpose, but
reproduction or distribution in any format is prohibited without written
permission. See provided URL for inquiries about permission.
http://dspace.mit.edu/handle/1721.1/7582
Mechanical Engineering.
Development of a low-cost, rapid-cycle hot embossing system for microscale parts
Thesis
application/pdf
Publication
unknown
unknown
<Publication xmlns="https://www.openaire.eu/cerif-profile/1.1/" id="670f7d0f-10ac-4ed3-a5cc-d01a51a94009">
<Type xmlns="https://www.openaire.eu/cerif-profile/vocab/COAR_Publication_Types">http://purl.org/coar/resource_type/c_1843</Type>
<Language>eng</Language>
<Title>Development of a low-cost, rapid-cycle hot embossing system for microscale parts</Title>
<PublishedIn>
<Publication>
</Publication>
</PublishedIn>
<PublicationDate>2009</PublicationDate>
<Authors>
<Author>
<DisplayName>Hale, Melinda (Melinda Rae)</DisplayName>
<Affiliation>
<OrgUnit>
</OrgUnit>
</Affiliation>
</Author>
</Authors>
<Editors>
</Editors>
<Publishers>
<Publisher>
<DisplayName>Massachusetts Institute of Technology</DisplayName>
<OrgUnit />
</Publisher>
</Publishers>
<License>http://dspace.mit.edu/handle/1721.1/7582</License>
<Keyword>Mechanical Engineering.</Keyword>
<Abstract>Hot embossing is an effective technology for reproducing micro-scale features in polymeric materials, but large-scale adoption of this method is hindered by high capital costs and low cycle times relative to other technologies, and a general lack of manufacturing equipment. This work details a hot embossing machine design strategy motivated by maximum production speed and quality with minimal capital cost. The approach is to "right-size" the machine for specific product needs while making the design flexible and scalable. Toward this end, a minimal number of components were used, commercially available off-the-shelf components were chosen where possible, system layout was designed to be modular, and system size was scaled for the intended products (in this case microfluidic devices). Innovative design aspects include the use of new ceramic substrate heaters for electrical heating, use of a moveable heat sink to minimize heat load during the heating cycle, and the careful design of the thermal elements to minimize the heating and cooling cycle times. The capital cost and the cost per part produced with this machine are estimated to be an order of magnitude less than currently available hot embossing manufacturing options. The hot embossing machine has been tested extensively to characterize the process variability. The minimum cycle time is two minutes, and microstructures are replicated within a maximum of a 25mm by 75mm area with very low relative variance in dimensions.</Abstract>
<Access xmlns="http://purl.org/coar/access_right"
>
</Access>
</Publication>