2026-09-20T03:06:34Zhttps://dspace.mit.edu/server/oai/request

oai:dspace.mit.edu:1721.1/548752022-01-13T07:54:36Zcom_1721.1_7582com_1721.1_7581col_1721.1_131022

Jongyoon Han. Mao, Pan Massachusetts Institute of Technology. Dept. of Mechanical Engineering. Massachusetts Institute of Technology. Department of Mechanical Engineering 2010-05-25T19:22:41Z 2010-05-25T19:22:41Z 2009 2009 http://hdl.handle.net/1721.1/54875 612393629 Thesis (Ph. D.)--Massachusetts Institute of Technology, Dept. of Mechanical Engineering, 2009. This electronic version was submitted by the student author. The certified thesis is available in the Institute Archives and Special Collections. Cataloged from student-submitted PDF version of thesis. Includes bibliographical references (p. 131-133). The development of micro/nanofluidics is expected to be the enabling technology for sample preparation of proteomic biosamples, which has been the bottleneck in proteomics. Most microfabricated nanofluidic channels, such as planar nanochannels and square nanochannels, suffer from small open volume and, as a result, low sample throughput, compared to microchips and conventional gel-based systems. For practical and wider applications of artificial nanochannels, it is of crucial importance to enhance sample throughput of nanofluidic systems. To address this severe problem, we proposed to build high-aspect-ratio vertical nanochannels, which have the advantage of large open volume, enabling their use for high-throughput applications. Two fabrication methods for creating massively-parallel, ultra-high-aspect-ratio nanochannels have been developed by using a combination of anisotropic wet etching and thermal oxidation. Vertical nanochannels with a uniform gap size of 55 nm and aspect ratio as high as 400 have been demonstrated. In addition, we have implemented high-aspect-ratio nanochannels into a two-dimensional anisotropic nanofilter array (ANA) device and demonstrated continuous-flow separation of DNA and proteins. Compared to other nanofilter devices, the vertical ANA device achieves comparable separation speed and efficiency but allows a much higher sample throughput. Lastly, we have demonstrated the uniform layer-by-layer deposition of polyelectrolyte multilayers (PEM) within high-aspect-ratio nanochannels. (cont.) Conformal, uniform deposition has been achieved along the entire depth of nanochannel and linear growth has been observed. Compared with the growth on flat substrate, significantly slower deposition per bilayer within nanochannels was found, which we attribute to the partioning effect. We also have performed dc conductance measurement to determine the wet-state thickness of PEM. The ability of uniform growth of PEM inside nanochannels not only allows the control of gap size, but also provides new functionalities with desired surface properties such as surface charge density, charge polarity, and hydrophobicity. by Pan Mao. Ph.D. 133 p. eng Massachusetts Institute of Technology M.I.T. theses are protected by copyright. They may be viewed from this source for any purpose, but reproduction or distribution in any format is prohibited without written permission. See provided URL for inquiries about permission. http://dspace.mit.edu/handle/1721.1/7582 Mechanical Engineering. Ultra-high-aspect-ratio nanofluidic channels for high-throughput biological applications Thesis application/pdf Publication unknown unknown <Publication xmlns="https://www.openaire.eu/cerif-profile/1.1/" id="9ff10b20-15b7-4b7f-b071-0ad004d94f10"> <Type xmlns="https://www.openaire.eu/cerif-profile/vocab/COAR_Publication_Types">http://purl.org/coar/resource_type/c_1843</Type> <Language>eng</Language> <Title>Ultra-high-aspect-ratio nanofluidic channels for high-throughput biological applications</Title> <PublishedIn> <Publication> </Publication> </PublishedIn> <PublicationDate>2009</PublicationDate> <Authors> <Author> <DisplayName>Mao, Pan</DisplayName> <Affiliation> <OrgUnit> </OrgUnit> </Affiliation> </Author> </Authors> <Editors> </Editors> <Publishers> <Publisher> <DisplayName>Massachusetts Institute of Technology</DisplayName> <OrgUnit /> </Publisher> </Publishers> <License>http://dspace.mit.edu/handle/1721.1/7582</License> <Keyword>Mechanical Engineering.</Keyword> <Abstract>The development of micro/nanofluidics is expected to be the enabling technology for sample preparation of proteomic biosamples, which has been the bottleneck in proteomics. Most microfabricated nanofluidic channels, such as planar nanochannels and square nanochannels, suffer from small open volume and, as a result, low sample throughput, compared to microchips and conventional gel-based systems. For practical and wider applications of artificial nanochannels, it is of crucial importance to enhance sample throughput of nanofluidic systems. To address this severe problem, we proposed to build high-aspect-ratio vertical nanochannels, which have the advantage of large open volume, enabling their use for high-throughput applications. Two fabrication methods for creating massively-parallel, ultra-high-aspect-ratio nanochannels have been developed by using a combination of anisotropic wet etching and thermal oxidation. Vertical nanochannels with a uniform gap size of 55 nm and aspect ratio as high as 400 have been demonstrated. In addition, we have implemented high-aspect-ratio nanochannels into a two-dimensional anisotropic nanofilter array (ANA) device and demonstrated continuous-flow separation of DNA and proteins. Compared to other nanofilter devices, the vertical ANA device achieves comparable separation speed and efficiency but allows a much higher sample throughput. Lastly, we have demonstrated the uniform layer-by-layer deposition of polyelectrolyte multilayers (PEM) within high-aspect-ratio nanochannels.</Abstract> <Abstract>(cont.) Conformal, uniform deposition has been achieved along the entire depth of nanochannel and linear growth has been observed. Compared with the growth on flat substrate, significantly slower deposition per bilayer within nanochannels was found, which we attribute to the partioning effect. We also have performed dc conductance measurement to determine the wet-state thickness of PEM. The ability of uniform growth of PEM inside nanochannels not only allows the control of gap size, but also provides new functionalities with desired surface properties such as surface charge density, charge polarity, and hydrophobicity.</Abstract> <Access xmlns="http://purl.org/coar/access_right" > </Access> </Publication>