2026-09-19T17:13:08Zhttps://dspace.mit.edu/server/oai/requestoai:dspace.mit.edu:1721.1/598982022-01-13T07:54:36Zcom_1721.1_7582com_1721.1_7581col_1721.1_131024
Dick K.P. Yue.
Brooks, Alice (Alice P.)
Massachusetts Institute of Technology. Dept. of Mechanical Engineering.
Massachusetts Institute of Technology. Department of Mechanical Engineering
2010-11-08T17:42:53Z
2010-11-08T17:42:53Z
2010
2010
http://hdl.handle.net/1721.1/59898
676694147
Thesis (S.B.)--Massachusetts Institute of Technology, Dept. of Mechanical Engineering, 2010.
Cataloged from PDF version of thesis.
Includes bibliographical references (p. 55-56).
The water spider, a unique member of its species, is used as inspiration for a bubble capture mechanism. Bubble mechanics are studied in the pursuit of a biomimetic solution for transporting air bubbles underwater. Careful experimentation is performed to understand the mechanics of bubble formation and capture. Investigation of bubble formation through an underwater nozzle shows that bubble volume increases by 15% when parallel rods are spaced above the nozzle at the same width as the inner diameter of the nozzle. Bubble volume decreases linearly with increasing air injection rate. Decreasing surface tension by approximately 40% decreases bubble volume by approximately 20%. Changing the angle the nozzle from parallel to perpendicular with the bottom of the tank increases bubble volume 40%. Based on trends observed in the nozzle experiments and using the spider's mechanisms for bubble capture as inspiration, a bubble capture device is manufactured. Decreasing the surface tension of the fluid by 25% decreases captured bubble volume by 50%. Below a device submersion speed of approximately 2.4 mm/s, bubble formation was at a maximum for the device, regardless of fluid surface tension. This research elucidates the limitations on bubble capture by the water spider. For future applications, these limitations can be pinpointed and adjusted for more efficient bubble capture and plastron maintenance.
by Alice Brooks.
S.B.
56 p.
eng
Massachusetts Institute of Technology
M.I.T. theses are protected by
copyright. They may be viewed from this source for any purpose, but
reproduction or distribution in any format is prohibited without written
permission. See provided URL for inquiries about permission.
http://dspace.mit.edu/handle/1721.1/7582
Mechanical Engineering.
Fluid mechanics of bubble capture by the diving bell spider
Thesis
application/pdf
false
Publication
unknown
unknown
<Publication xmlns="https://www.openaire.eu/cerif-profile/1.1/" id="a688a9db-e676-45de-a516-c66157c584fa">
<Type xmlns="https://www.openaire.eu/cerif-profile/vocab/COAR_Publication_Types">http://purl.org/coar/resource_type/c_1843</Type>
<Language>eng</Language>
<Title>Fluid mechanics of bubble capture by the diving bell spider</Title>
<PublishedIn>
<Publication>
</Publication>
</PublishedIn>
<PublicationDate>2010</PublicationDate>
<Authors>
<Author>
<DisplayName>Brooks, Alice (Alice P.)</DisplayName>
<Affiliation>
<OrgUnit>
</OrgUnit>
</Affiliation>
</Author>
</Authors>
<Editors>
</Editors>
<Publishers>
<Publisher>
<DisplayName>Massachusetts Institute of Technology</DisplayName>
<OrgUnit />
</Publisher>
</Publishers>
<License>http://dspace.mit.edu/handle/1721.1/7582</License>
<Keyword>Mechanical Engineering.</Keyword>
<Abstract>The water spider, a unique member of its species, is used as inspiration for a bubble capture mechanism. Bubble mechanics are studied in the pursuit of a biomimetic solution for transporting air bubbles underwater. Careful experimentation is performed to understand the mechanics of bubble formation and capture. Investigation of bubble formation through an underwater nozzle shows that bubble volume increases by 15% when parallel rods are spaced above the nozzle at the same width as the inner diameter of the nozzle. Bubble volume decreases linearly with increasing air injection rate. Decreasing surface tension by approximately 40% decreases bubble volume by approximately 20%. Changing the angle the nozzle from parallel to perpendicular with the bottom of the tank increases bubble volume 40%. Based on trends observed in the nozzle experiments and using the spider's mechanisms for bubble capture as inspiration, a bubble capture device is manufactured. Decreasing the surface tension of the fluid by 25% decreases captured bubble volume by 50%. Below a device submersion speed of approximately 2.4 mm/s, bubble formation was at a maximum for the device, regardless of fluid surface tension. This research elucidates the limitations on bubble capture by the water spider. For future applications, these limitations can be pinpointed and adjusted for more efficient bubble capture and plastron maintenance.</Abstract>
<Access xmlns="http://purl.org/coar/access_right"
>
</Access>
</Publication>