2026-09-19T15:43:42Zhttps://dspace.mit.edu/server/oai/request

oai:dspace.mit.edu:1721.1/879572022-01-13T07:54:05Zcom_1721.1_7582com_1721.1_7581col_1721.1_131023

Ahmed F. Ghoniem. Chen, Tianjiao, S.M. Massachusetts Institute of Technology Massachusetts Institute of Technology. Department of Mechanical Engineering. Massachusetts Institute of Technology. Department of Mechanical Engineering 2014-06-13T22:36:24Z 2014-06-13T22:36:24Z 2014 http://hdl.handle.net/1721.1/87957 880676196 Thesis: S.M., Massachusetts Institute of Technology, Department of Mechanical Engineering, 2014. Cataloged from PDF version of thesis. "February 2014." Includes bibliographical references (pages 106-110). Chemical looping combustion (CLC) is one of the most promising technologies to achieve carbon capture in fossil fuel power generation plants. A novel rotary-bed reactor concept was proposed by Zhao et. al. [1] in 2013. It is a compact gas fueled CLC reactor that could achieve high fuel conversion and carbon separation efficiencies. It is different from the widely applied and tested fluidized-bed reactor that employs metal oxides coated on particle shaped support materials as the reaction median. In the new reactor, the active metal oxidizes are coated on the surfaces of channel shaped structural material in the new reactor. Due to the different reaction mechanism, an alternative experimental platform with the capability of performing reaction kinetic analysis for disk or channel shaped samples was required needed. The sample selection, characterization and preparation methods are discussed, followed by the introduction of the experimental system design and initial calibration and tuning results. Preliminary oxidation kinetic studies are carried out using the real-time gas analysis system to obtain the concentration contours of the effluent gas species. Commercial 13 wt% copper(II) oxide particles prepared through impregnation method are used as the reaction median. The reactant gas used in the oxidation cycles is 8%, 13% and 21% oxygen in argon, operated at 700 - 800 *C; and 10% hydrogen in argon is used for the reducing cycles. by Tianjiao Chen. S.M. 117 pages eng Massachusetts Institute of Technology M.I.T. theses are protected by copyright. They may be viewed from this source for any purpose, but reproduction or distribution in any format is prohibited without written permission. See provided URL for inquiries about permission. http://dspace.mit.edu/handle/1721.1/7582 Mechanical Engineering. Experimental characterization and chemical kinetics study of chemical looping combustion Thesis application/pdf Publication unknown unknown <Publication xmlns="https://www.openaire.eu/cerif-profile/1.1/" id="640edfa0-41a6-42ac-8840-f55d16efcaee"> <Type xmlns="https://www.openaire.eu/cerif-profile/vocab/COAR_Publication_Types">http://purl.org/coar/resource_type/c_1843</Type> <Language>eng</Language> <Title>Experimental characterization and chemical kinetics study of chemical looping combustion</Title> <PublishedIn> <Publication> </Publication> </PublishedIn> <PublicationDate>2014</PublicationDate> <Authors> <Author> <DisplayName>Chen, Tianjiao, S.M. Massachusetts Institute of Technology</DisplayName> <Affiliation> <OrgUnit> </OrgUnit> </Affiliation> </Author> </Authors> <Editors> </Editors> <Publishers> <Publisher> <DisplayName>Massachusetts Institute of Technology</DisplayName> <OrgUnit /> </Publisher> </Publishers> <License>http://dspace.mit.edu/handle/1721.1/7582</License> <Keyword>Mechanical Engineering.</Keyword> <Abstract>Chemical looping combustion (CLC) is one of the most promising technologies to achieve carbon capture in fossil fuel power generation plants. A novel rotary-bed reactor concept was proposed by Zhao et. al. [1] in 2013. It is a compact gas fueled CLC reactor that could achieve high fuel conversion and carbon separation efficiencies. It is different from the widely applied and tested fluidized-bed reactor that employs metal oxides coated on particle shaped support materials as the reaction median. In the new reactor, the active metal oxidizes are coated on the surfaces of channel shaped structural material in the new reactor. Due to the different reaction mechanism, an alternative experimental platform with the capability of performing reaction kinetic analysis for disk or channel shaped samples was required needed. The sample selection, characterization and preparation methods are discussed, followed by the introduction of the experimental system design and initial calibration and tuning results. Preliminary oxidation kinetic studies are carried out using the real-time gas analysis system to obtain the concentration contours of the effluent gas species. Commercial 13 wt% copper(II) oxide particles prepared through impregnation method are used as the reaction median. The reactant gas used in the oxidation cycles is 8%, 13% and 21% oxygen in argon, operated at 700 - 800 *C; and 10% hydrogen in argon is used for the reducing cycles.</Abstract> <Access xmlns="http://purl.org/coar/access_right" > </Access> </Publication>