2026-09-18T22:51:21Zhttps://dspace.mit.edu/server/oai/requestoai:dspace.mit.edu:1721.1/899822022-01-13T07:55:22Zcom_1721.1_7582com_1721.1_7581col_1721.1_131024
Yet-Ming Chiang.
Villalón, Thomas A., Jr. (Thomas Aanthony)
Massachusetts Institute of Technology. Department of Materials Science and Engineering.
Massachusetts Institute of Technology. Department of Materials Science and Engineering
2014-09-19T21:32:31Z
2014-09-19T21:32:31Z
2014
2014
http://hdl.handle.net/1721.1/89982
890130081
Thesis: S.B., Massachusetts Institute of Technology, Department of Materials Science and Engineering, 2014.
Cataloged from PDF version of thesis.
Includes bibliographical references (pages 43-45).
This study sought to evaluate hard carbon's fracture characteristics under different cycling rates due to its lithium solid solubility and isotropic nature. In addition to the evaluation, an electrochemical shock map was modified from a previous study to try and predict what conditions of particle size and C-rate are necessary to cause brittle fracture events in hard carbon. Subsequently, hard carbon anodes were created using a formulation of hard carbon, carbon black, and Kureha binder and subjected to two or three cycles of C-rates varying from C/10 to 5 C. Data evaluation suggests that for every C increase approximately nine more percent of the particles in the system will develop cracks. Further analysis of the data shows that low C-rate anodes may have been affected by inhomogeneous mixtures, skewing the linear relationship to a higher than accurate value in the linear plot. Additionally, a C-rate limit that prevents any brittle fracture from occurring can be found at c/10 or lower. When comparing the anodes to the model, the model shows accuracy in C predicting failure conditions for the higher C-rate anodes. When applied to lower C-rates (below c/2), the 2 accuracy of the model begins to fall. Possible solutions to this problem include finding more accurate material properties for hard carbon or redefining the model to account for some unique value (i.e. - the hard carbon's geometry) associated with the hard carbon. Additionally, more anodes should be tested to create a larger sampling that can average cells that have inhomogeneous mixtures.
by Thomas A. Villalón Jr.
S.B.
45 pages
eng
Massachusetts Institute of Technology
M.I.T. theses are protected by copyright. They may be viewed from this source for any purpose, but reproduction or distribution in any format is prohibited without written permission. See provided URL for inquiries about permission.
http://dspace.mit.edu/handle/1721.1/7582
Materials Science and Engineering.
The characterization of c-rate dependent hard carbon anode fracture induced by lithium intercalation
Thesis
application/pdf
Publication
unknown
unknown
<Publication xmlns="https://www.openaire.eu/cerif-profile/1.1/" id="853f2310-760d-413e-8b56-47915e88e434">
<Type xmlns="https://www.openaire.eu/cerif-profile/vocab/COAR_Publication_Types">http://purl.org/coar/resource_type/c_1843</Type>
<Language>eng</Language>
<Title>The characterization of c-rate dependent hard carbon anode fracture induced by lithium intercalation</Title>
<PublishedIn>
<Publication>
</Publication>
</PublishedIn>
<PublicationDate>2014</PublicationDate>
<Authors>
<Author>
<DisplayName>Villalón, Thomas A., Jr. (Thomas Aanthony)</DisplayName>
<Affiliation>
<OrgUnit>
</OrgUnit>
</Affiliation>
</Author>
</Authors>
<Editors>
</Editors>
<Publishers>
<Publisher>
<DisplayName>Massachusetts Institute of Technology</DisplayName>
<OrgUnit />
</Publisher>
</Publishers>
<License>http://dspace.mit.edu/handle/1721.1/7582</License>
<Keyword>Materials Science and Engineering.</Keyword>
<Abstract>This study sought to evaluate hard carbon's fracture characteristics under different cycling rates due to its lithium solid solubility and isotropic nature. In addition to the evaluation, an electrochemical shock map was modified from a previous study to try and predict what conditions of particle size and C-rate are necessary to cause brittle fracture events in hard carbon. Subsequently, hard carbon anodes were created using a formulation of hard carbon, carbon black, and Kureha binder and subjected to two or three cycles of C-rates varying from C/10 to 5 C. Data evaluation suggests that for every C increase approximately nine more percent of the particles in the system will develop cracks. Further analysis of the data shows that low C-rate anodes may have been affected by inhomogeneous mixtures, skewing the linear relationship to a higher than accurate value in the linear plot. Additionally, a C-rate limit that prevents any brittle fracture from occurring can be found at c/10 or lower. When comparing the anodes to the model, the model shows accuracy in C predicting failure conditions for the higher C-rate anodes. When applied to lower C-rates (below c/2), the 2 accuracy of the model begins to fall. Possible solutions to this problem include finding more accurate material properties for hard carbon or redefining the model to account for some unique value (i.e. - the hard carbon's geometry) associated with the hard carbon. Additionally, more anodes should be tested to create a larger sampling that can average cells that have inhomogeneous mixtures.</Abstract>
<Access xmlns="http://purl.org/coar/access_right"
>
</Access>
</Publication>