2026-09-19T23:12:42Zhttps://dspace.mit.edu/server/oai/requestoai:dspace.mit.edu:1721.1/920662022-01-13T07:54:05Zcom_1721.1_7582com_1721.1_7581col_1721.1_131024
H. Harry Asada.
Gonzalez, Daniel Jesus
Massachusetts Institute of Technology. Department of Mechanical Engineering.
Massachusetts Institute of Technology. Department of Mechanical Engineering
2014-12-08T18:09:33Z
2014-12-08T18:09:33Z
2014
2014
http://hdl.handle.net/1721.1/92066
897206081
Thesis: S.B., Massachusetts Institute of Technology, Department of Mechanical Engineering, 2014.
This electronic version was submitted by the student author. The certified thesis is available in the Institute Archives and Special Collections.
Cataloged from student-submitted PDF version of thesis.
Includes bibliographical references (pages 47-49).
In this work, an underactuated robot gripper was designed to meet specifications for strength, cost, and ease of manufacturing with Open-Source distribution in mind. The specifications emerged from a need for inexpensive grippers that can be used on robots that help people brace and balance. The structure and transmission of the gripper is designed to bear 150 lbs-force of static tensile and compressive loads. Gripping forces that exceed the static actuator force output are achieved by a novel method of clamping the main drive tendon by detecting dynamic overshoot and applying a self-helping cable brake, relieving the main drive actuator. The geometry, stiffness, and behavior of the gripper was designed using mathematical models and tools developed in prior art for the optimal design of underactuated hands. Apart from the actuators and waterjet machining services, the materials for the gripper can be purchased in one McMaster-Carr order. The entire structure can be cut from a single sheet of 1/16" 2024 aluminum and requires one operation on a waterjet machine, which can be found in many machine shops or through online machining services. It is the intention of the author to release the design files as Open-Source in order to allow robot researchers, engineers, and enthusiasts to use this gripper in their own work.
by Daniel Jesus Gonzalez.
S.B.
49 pages
eng
Massachusetts Institute of Technology
M.I.T. theses are protected by copyright. They may be viewed from this source for any purpose, but reproduction or distribution in any format is prohibited without written permission. See provided URL for inquiries about permission.
http://dspace.mit.edu/handle/1721.1/7582
Mechanical Engineering.
A low-cost, high-strength, open-source, rapid prototypeable underactuated robot gripper
Thesis
application/pdf
Publication
unknown
unknown
<Publication xmlns="https://www.openaire.eu/cerif-profile/1.1/" id="6cf0f24c-57e8-4dfc-966f-0134f393ff7d">
<Type xmlns="https://www.openaire.eu/cerif-profile/vocab/COAR_Publication_Types">http://purl.org/coar/resource_type/c_1843</Type>
<Language>eng</Language>
<Title>A low-cost, high-strength, open-source, rapid prototypeable underactuated robot gripper</Title>
<PublishedIn>
<Publication>
</Publication>
</PublishedIn>
<PublicationDate>2014</PublicationDate>
<Authors>
<Author>
<DisplayName>Gonzalez, Daniel Jesus</DisplayName>
<Affiliation>
<OrgUnit>
</OrgUnit>
</Affiliation>
</Author>
</Authors>
<Editors>
</Editors>
<Publishers>
<Publisher>
<DisplayName>Massachusetts Institute of Technology</DisplayName>
<OrgUnit />
</Publisher>
</Publishers>
<License>http://dspace.mit.edu/handle/1721.1/7582</License>
<Keyword>Mechanical Engineering.</Keyword>
<Abstract>In this work, an underactuated robot gripper was designed to meet specifications for strength, cost, and ease of manufacturing with Open-Source distribution in mind. The specifications emerged from a need for inexpensive grippers that can be used on robots that help people brace and balance. The structure and transmission of the gripper is designed to bear 150 lbs-force of static tensile and compressive loads. Gripping forces that exceed the static actuator force output are achieved by a novel method of clamping the main drive tendon by detecting dynamic overshoot and applying a self-helping cable brake, relieving the main drive actuator. The geometry, stiffness, and behavior of the gripper was designed using mathematical models and tools developed in prior art for the optimal design of underactuated hands. Apart from the actuators and waterjet machining services, the materials for the gripper can be purchased in one McMaster-Carr order. The entire structure can be cut from a single sheet of 1/16" 2024 aluminum and requires one operation on a waterjet machine, which can be found in many machine shops or through online machining services. It is the intention of the author to release the design files as Open-Source in order to allow robot researchers, engineers, and enthusiasts to use this gripper in their own work.</Abstract>
<Access xmlns="http://purl.org/coar/access_right"
>
</Access>
</Publication>